Installation Guide

1. Setting up the
Secure Link Wi-Fi Hub
You should install the Secure Link Wi-Fi Hub after you have
successfully finished installation and set up of your Lockly Smart
Lock. Refer to your appropriate Lockly Smart Lock Installation
Guide and User Manual that came with the lock for reference.
The Secure Link Wi-Fi Hub (Part A) can be plugged into any
standard 5V 1A USB port or use the UL certified USB AC adapter
included in this box (recommended).
For best connectivity, the Secure Link Wi-Fi Hub must be
installed within 15 feet of your Lockly Smart Lock. You may
experience delayed or intermittent connectivity if the Secure
Link Wi-Fi Hub is installed further than 15 feet away from the
Lockly Smart Lock.
Lockly Smart Lock
PGD728 Series Shown
as reference only
Secure Link Wi-Fi Hub
Part A Shown Above
as reference only
15 Feet (4.5 Meters)
Distance Between
In order for your Secure Link Wi-Fi Hub to connect to the internet, you must have
a Wi-Fi network with a radio signal emitting 2.4 GHz. All modern Wi-Fi devices
support 2.4 GHz connections while some equipment supports both 2.4 GHz and 5
GHz. Please check with your network administrator or internet provider if you’re
unsure what kind of network you have.
Proceed to the next page to read how to finish set up of your Wi-Fi Hub.