Installation Guide

Plug the Secure Link Wi-Fi Hub into the 5V 1A USB AC adapter
and plug the AC adapter to your wall socket.
USA Outlet Shown
A RED LED indicator light will
flash slowly to indicate that
the Wi-Fi Hub is ready to
connect.
LED Indicator is
located next to the
Setup Button
Once you have confirmed that your Secure Link Wi-Fi Hub is
ready to connect to your lock, open the Lockly app to get
started.
In case you have not downloaded our app,
you can scan the QR code to the left or visit
https://lockly.com/app
Make sure you have already created an account and setup
your Lockly device to the Lockly app to continue.
Before you continue the Secure Link Wi-Fi Hub set up on your
app, proceed to the next page to learn more about using the
Secure Link Wi-Fi Hub and best practices for connectivity.