Installation Instructions

While in Programming Mode, select “2DE” to delete an RFID card. If you are not
in Programming Mode, please see Section 3.1 to enter Programming Mode.
After pressing “1PG” , then press “2DE” select “Id” to delete an RFID card.
SECTION 3.1020
You will then see a confirmation
page displaying and with RFID
card number you are deleting
displayed in the lower left. Select Y
to delete or N to cancel.
Your registered RFID card will be
displayed on the screen. Tap the
screen to show the next registered
RFID. When you have found the RFID
card you want to delete, press and
hold the button for 3 seconds to
3.10 Deleting RFID
Alternatively, while on Programming Mode, select "2DE”, then press "Id" and
place the registered RFID card to delete on the card reader. Your smart lock will
identify the RFID card and jump to confirmation page displaying and .
Select Y to delete or N to cancel.