Installation Instructions

SECTION 4.2 - 4.3 25
Place a registered finger to the fingerprint
scanner located on the exterior side of the lock
to the right.
To register a fingerprint, please see Section 3.6.
If your fingerprint is registered and acknowl-
edged, you will hear a “beep” sound and a
Green LED will light up on the fingerprint
scanner. You can then open the door.
If you see a Red LED, it means your fingerprint is
not recognized. You must wait until the red LED
is off to try again.
For best fingerprint scanning practices, see
Section 3.6
To lock your smart lock, press the OK Button anytime or brush your hand across the
screen when the lock is unlocked.
OK Button
Locking
Unlocking
CARD
Light up the screen by touching the keypad and tap
your RFID card closer to the panel. You can push
down the handle and open the door after it chimed.
Lockly Guard Ingress can support up to 1000 RFID
cards. Additional RFID cards can be ordered through
our customer hotline: [phone] or by email:
[e-mail].
CARD