Installation Guide

(4X)
INSTALLING STRIKE PLATE
Use the included door strike plate which has the built-in door sensor magnet.
If your door gap is larger than 5mm, it is recommended to install Strike Spacer to
lessen the gap to ensure the normal operation of the door sensor.
A1
L
L
S
S
Because doors and frames vary in design it may be necessary to
make slight adjustments to your strike plate and/or dust box in order
to ensure smooth deadbolt operation. This is very important. If the
deadbolt is binding or catching in any way, the lock will beep rapidly,
indicating it cannot close due to misalignment and/or excessive
rubbing or binding.
8
T
side view (70mm)
side view (60mm)
When installing the
deadbolt and door
strike, make sure the
two red marks are
aligned.
Step 6
USE THE INCLUDED DOOR STRIKE PLATE
WITH INTEGRATED DOOR SENSOR.
Depending on your door and door frame
gap you may need to increase the depth
of the groove or use strike spacer to lessen
the gap.