Zeno Series Start Second Lockly Vision Powered by PGK798HK Setup and Use
We’re here to help Your Lockly smart lock comes with lifetime technical support. Feel free to contact us with any questions or comments. (669) 500-8835 help@Lockly.com support.Lockly.
Setup App download 04 Lock overview 07/8 Apple Home 10 Charge/install battery Hub overview Fingerprint access Adding a fingerprint 05/6 09 11 12
Download the Lockly app Scan or visit Lockly.com/app The Lockly app will guide you through final installation, setup, and creating your user profile for a more tailored and optimized experience.
Charge the battery Ensure battery has been fully charged. Charge the battery with the included USB-C cable and a common mobile device charger (not included) rated 5V/2A or higher. A full charge can take up to 12 hours.
Install battery and start self-check Ensure battery has been fully charged. Install battery as shown. Perform self-check (skip if done) Immediately hold the red program button for 4 seconds. The lock will perform a self-diagnostic by extending and retracting the deadbolt multiple times. Open the Lockly app and tap (+) to add a new device. Locate your Lockly model and follow in-app instructions to continue setup.
Getting to know your Lockly Vision Exterior 2K Video Doorbell with 2-way audio Camera PIN Genie digital keypad Apple Home Key sensor Safe Mode Wake up screen/ enter button Low battery indicator Powered by Wi-Fi status Physical key hole Unlocked indicator/ Welcome Mode Fingerprint sensor/ LED indicator USB-C backup power port 07
Interior Battery cover SN number/ Apple HomeKit code Program/reset button Visage Zeno Series Deadbolt Edition PGKXXXXXXX SN: PGKXXXXXXXXXXX Lock/unlock thumbturn Interior side LED indicator light 08 1234 5678
Setup New-Gen Vision Connect Hub Connect the hub to power. Follow the in-app instructions to complete the setup. Reset LED status light TF Card (already inserted) Power adapter cable For the best Wi-Fi connection: • Avoid placing the device in kitchens to prevent signal disruptions from appliances. • Keep it away from walls and obstructions that can absorb wireless signals. • Avoid placing it on the floor, as the ground can absorb signals.
Set up Apple Home Unlock your door with your iPhone or Apple Watch and monitor its status through the Home app. Open Apple’s Home app and select (+), Add Accessory. Vision Zeno Series Deadbolt Edition PGKXXXXXXX 1234 5678 SN: PGKXXXXXXXXXXX Locate the Apple HomeKit code under the battery cover or on the activation card. Scan code when prompted. Follow the in-app instructions to add your Home Key to your Wallet app.
Set up fingerprint access Fingerprint scanning For fast and reliable fingerprint recognition, it's important to follow correct finger positioning when registering your fingerprints. Alignment Avoid positioning finger too high or low on the sensor. Avoid positioning finger too much off-center left or right. Angle Keep finger straight and somewhat flat; avoid holding at an angle.
Adding a fingerprint In the Lockly app, choose your lock then select “Access” and follow on-screen instructions. Scanning process Your finger will be scanned six times for optimal accuracy. The countdown shows in the lower-left circle of the digital screen, starting from six. Place your finger on the sensor and hold still until you hear a beep. Slightly adjust your finger position and hold for each remaining scan until you hear a longer beep with the word "pass" indicating a successful scan.
Use PIN Genie keypad 14 Unlock with keypad 15 Auto and manual lock 17 Fingerprint access 19 Adding a PIN code Using Video Doorbell Apple Home Keys Unlock with app More ways to access Alert and sounds 16 18 20 21 22/23 24/25 Troubleshooting/FAQs 27/28
PIN Genie™ keypad Dynamic shuffling technology Exclusive hack-proof PIN Genie digital keypad shuffles PIN (personal identification number) between each use. Using PIN codes are made up of six digits, for example 3 5 1 2 9 0. Each number can show up anywhere in one of three positions inside for circles. Simply press anywhere on a circle containing the corresponding number to enter your six digit PIN code. Unlocking After all six numbers are entered press the enter button to unlock.
Unlock with digital keypad Powered by Unlock Press the circle to wake screen. Enter your PIN code by pressing anywhere in the circles that contain the corresponding numbers; you do not need to press the exact number. Press the enter button after the last digit of your PIN code has been entered. Powered by Lock To lock, press the enter button while the screen is active, or the area of the 4 circilar number buttons while the screen is off.
Adding additional access codes Access code types Set permanent, recurring, time-based, or one-time use access codes. 123456 Default PIN code The default PIN code is 1 2 3 4 5 6. During setup, you will be prompted to set a new code to replace it. Adding a code Select your lock from the Lockly app, then select Access then user, Access Code and follow the on-screen instructions to setup the various types of codes.
Auto and manual locking When unlocked the icon will appear on screen. Auto-locking In the Lockly app, set your desired time (example 5-min) under settings of your lock, auto-lock timer. Lock using digital screen Swipe top to bottom with two fingers when screen is off or press the enter button when screen is on. Interior locking Rotate the thumbturn on the interior assembly. Lock with key Insert physical key and rotate. You can set auto-lock timing under your lock’s setting in the Lockly app.
Using Video Doorbell Ensure the New-Gen Vision Connect Hub has been set up and your phone can receive push notifications. Press the doorbell button on the Lockly Vision. A notification will be sent to your smartphone. Tap the notification to open camera view in the Lockly app. Unlock or initiate a two-way conversation within the live view. You can record the call in the Lockly app. Live view of the camera can also be activated from the Lockly app.
Unlock with your finger Featuring advanced AI learning technology. Powered by Place a registered finger flat and centered on the sensor. Green circular LED: with a beep; door is unlocked. Red circular LED: with two beeps; finger not recognized. Try again or try another registered finger. Our advanced biometric sensor with AI learning technology recognizes your fingerprint in 0.2 seconds and improves in speed and accuracy with use.
Unlock with Apple home Keys Open your door with your iPhone and Apple Watch Unlock your door with home key in Apple Wallet (on your compatible iPhone and Apple Watch). Set up a home key Add your Lockly lock to the Home app. Choose the "Express Mode" unlocking option. Unlock your door with a home key On your iPhone or Apple Watch and with Express Mode turned on, place your device near the icon to unlock. Powered by Learn more about home key in Apple Wallet on the iPhone User Guide online at: support.apple.
Unlock with Lockly app Lock, unlock, and check status. Unlock or lock Choose your lock in the Lockly app, tap unlock or lock. Remote app control Unlock, lock, check status, and get notifications from anywhere on your smartphone. History and status monitoring Check real-time status and history on your smartphone.
More Ways to Access and Control Secure access, control, and monitoring options. eKeys and eBadges Share one-time, permanent, recurring, or revocable access with people you trust. Voice control Unlock, lock, or check door status through Amazon Alexa, Apple Siri, and Google Assistant. Offline Access CodesTM Grant one-time access through the Lockly app without needing an internet connection. Welcome Mode Temporarily keep your lock from auto-locking for more convenient trusted user access.
History and status monitoring Check real-time status and history on your smartphone. Air Transfer Easily transfer user profiles between Lockly device for seamless setup and access management. Set up user privileges Grant sub-admin privileges to allow others to manage your property. Manage multiple properties Manage access control and reporting with LocklyOS, the cloud platform for property access management. For more information, refer to the Lockly app or visit support.Lockly.com.
Alerts and sounds Exterior Assembly Alerts Fingerptint Exterior LED indicator flashes green with a ‘beep’ sound Door unlocked Exterior LED indicator flashes red with two 'beep' sounds Fingerprint recognition failed Access Code Exterior LED indicator flashes green Door unlocked Exterior LED indicator flashes red Incorrect access code entered Apple Home Key / Voice Control Exterior LED indicator flashes green Door unlocked Video Doorbell 24 Exterior LED indicator flashes white Doorbell ringing Exterio
Interior Assembly Alerts Battery Interior LED indicator flashes red with a beep sound (x3) Battery level is less than 20% Interior LED indicator flashes red with a beep sound (x5) Battery level is critically low (3 unlocks remaining). Charge battery immediately.
Troubleshooting FAQs
Troubleshooting/FAQs Why is my keypad not responding? • Press the circle button • If to activate the keypad. is flashing, your smart lock is in Safe Mode. Unlock with other access credentials (fingerprint, mobile app, home key or physical key) to exit. • If water is detected, Rain Mode may be activated. Unlock your door with other authentication methods (Apple Home Keys, Lockly app..) • Check if batteries are installed correctly. • Refer to support.Lockly.
Troubleshooting/FAQs Why is my New-Gen Vision Connect Hub cannot find my Wi-Fi networks? • The New-Gen Vision Connect Hub works with 2.4GHz wireless networks. • Check your router if it is combining the 2.4GHz and 5GHz bands. • Refer to your router’s manual to separate the two bands or refer to support.Lockly.com for more details. How to pair my smart lock with a new phone? • Download the Lockly app on your new device and log in using the same account credentials, follow in-app instructions.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
© Copyright 2024 Lockly All rights reserved US Patent No. US 9,881,146 B2 | US Patent No. US 9,853,815 B2 | US Patent No. US 9,875,350 B2 | US Patent No. US 9,665,706 B2 | US Patent No. US 11,010,463 B2 | AU Patent No. 2013403169 | AU Patent No. 2014391959 | AU Patent No. 2016412123 | UK Patent No. EP3059689B1 | UK Patent No. EP3176722B1 | patternity technology patterned or parents and pattern pending.
Let’s co-create together! Have an innovative idea? Need a new solution for a situation? Let us know. We are always innovating based on customer input and feedback. (669) 500-8835 or hello@Lockly.com Own a business? Learn about how LocklyPRO and LocklyOS can help you in your business. (510) 288-9928 or prosales@Lockly.com © Copyright 2024 Lockly All rights reserved. (See details on the inside back cover).
