Installation Guide

STEP 2. ADJUST DEADBOLT AND INSTALL
2.1: Deadbolt slit hole must be aligned to the center of the door hole. If not
adjust as shown below:
2.1.1: Wear gloves during adjustment
to prevent pinching your hands)
Hold the metal
plate (c) and twist
the deadbolt body
(d) clockwise till it
snaps to 2-3/8"
To return to default status,
while the deadbolt (b) is
extended, hold the metal
plate (c) and twist the dead-
bolt body (d) counter-clock-
wise till it snaps to 2-3/4"
(b)
（a）
（c） （d）
（c）
（d）
Push the crank
(a) to extend the
deadbolt (b)