User's Manual

If you have never connected the Secure Link Wi-Fi Hub to your smart
lock, the Secure Link should have a slow flashing RED LED Indicator.
Press and hold the Setup Button located on the top of the Wi-Fi Hub
for 3 seconds until you see the RED LED Indicator start to rapidly flash.
Press and Hold
3 Seconds
If you don’t see anything appear with a Bluetooth icon and a name
starting with PGH200... simply click the Refresh button on the upper
right to rescan. Make sure your Wi-Fi Hub is showing a flashing
RED LED indicator and the Wi-Fi Hub is within the optimal distance
of 10 feet from your lock. Select the desired Wi-Fi Hub to continue.
Refresh
Minimum 2-3 Bars
Recommended