User Manual

INSTALLATIONS INSTRUCTIONS

1. CONFIGURE LATCH BACKSET

The BACKSET is the distance between the center of cross

bore and edge bore of the door.

Adjustable latch ts both BACKSET of 2-3/8” (60mm) and

2-3/4” (70mm). Please follow the steps shown below for

BACKSET adjustment.

DEADBOLT BACKSET

Rotate the latch case as diagram on the right for backset

2-3/4” (70mm) or reverse direction for 2-3/8” (60mm).

LEVER BACKSET

The backset shown on the left is 60mm (2-3/8”).

Pull the cam toward right to extend the backset to 70mm (2-3/4”).

The backset shown in gure C is 70mm (2-3/4”). Pull the cam back to left will return

the backset to 60mm (2-3/8”).

Note : The shape of cam should be square.