Use and Care Manual

1 Press the button on your router
Generally, you will have at least 2 minutes to enable WPS on
your lock once you press this button. Refer to your router
owners manual for more information on WPS if needed.
2 Enable WPS on your lock
On your lock, enter the following on the keypad:
Programming Code + 001 + LockState Button
After entering the code sequence above and pressing
the LockState Button, you will hear 2 beeps. Within 10
seconds, the lock will begin to flash as it searches for the
router and attempts to connect.
Once the lock connects with your router, you will hear 3
quick beeps to confirm.
YYour lock is now connected to the internet. Proceed to
the last step in this manual titled “Login to Web Manage-
ment Portal.”
The default Programming Code is 12345678. However,
you may have changed this when installing the lock.
There are 2 possible methods of connecting your lock to the internet...
Look on your Wi-Fi router for a button with
the rotating arrows symbol pictured here
to the left. If you have this button, you can
use this method. If not, move on to Method
2. WPS is available on most recently
purchased popular brand routers.
Method 1: Wi-Fi Protected Setup (WPS)