GPS Walker User Manual Version 1.6 May.
GPS Walker User Manual Table of Content SAFETY AND WARNINGS............................................................................................................................................ 1 INTRODUCTION OF THE GPS DATA LOGGER ...................................................................................................... 2 FEATURES ...............................................................................................................................................................
GPS Walker User Manual Safety and Warnings Turn the volume down before putting on the headphones. While listening to music, slowly increase the volume until you are comfortable with the sound. Static Electricity To avoid static electricity, do not use the player in an extremely dry environment. In an environment with electrostatic discharge, GPS Walker may get malfunction and require the user to reset the product. USB Storage Device Data Protection ¾ Always insert the USB device in the correct direction.
GPS Walker User Manual Introduction of the GPS Data logger Features • • • • • • • • • • • • • • Point to point navigation 2GB memory size for continuous 2,000,000 GPS data log Manual setting frequency and minimum speed for logging Embedded SiRF Star III high sensitivity low power chip LCD indicator GPS status WMA/MP3 Player FM tuner Synchronous Lyric Display with MP3 Music Platform: Windows 2000/XP/Vista/Win 7 USB 2.0 supported 128 x 64 Dots Matrix Display Superb Audio Quality Standard 3.
GPS Walker User Manual Keys and Ports A. USB port : Play/Enter B. GPS power on/off <<: Left/Skip previous/Rewind C. Battery compartment D. Earphone socket >>:Right/Skip next/Forward G: Control key ∧: Up/Volume up ∨:Down/Volume down E: Power on/off F: Menu Screen Display A. Current track number / Total track number/Lyrics display B. Play/Pause C. Elapsed time D. Repeat mode 3 E. F. G. H.
GPS Walker User Manual Transferring Data to Your GPS Data logger 1. Connect your GPS data logger to USB port by using USB cable. The data logger will show “Usb-connect” when it is connecting to a computer. 2. Right click on the folders and files you want to transfer to your GPS data logger, and select Copy. 3. Open the Removable Disk represented your GPS data logger, right click and select Paste. Removing the GPS Data Logger from Your Computer 1. 2. 3. 4.
GPS Walker User Manual • Make sure the MP3 music file and LRC file are located in the same directory and the filenames are the same. If not, the data logger can not recognize the lyric file. Basic Operation ¾ Press and hold the Power button for about 3 seconds to turn on the GPS data logger. ¾ In playing mode press the Play button to pause, or press it again to continue. ¾ Press (∧/∨) buttons to increase/decrease volume.
GPS Walker User Manual Menu Structure Main menu Submenu/Status GPS Signal Submenu Log Interval Off/1Sec/3Sec/5Sec/10Sec/ 15Sec Min Speed Off/2KMH/4KMH/10KMH Mark Mark &Go GPS Select Mark Compass GPS Power About Off/On Music AddToPreset LoadPreset Delete FM AutoScan ManuScan Return Time Equalizer Repeat Backlight Settings Brightness Contrast SetTime Language FM Band Normal/Classic/Pop/Jazz /Xbass/Rock Normal/Repeat One/Repeat All/Random/Random All 3Sec/5Sec/10Sec/15Sec/ Always On 0/1/2/3/4/5
GPS Walker User Manual Music 1. Select Music in the main menu and press the Play button to enter. 2. Press the Up or Down button to choose a song or folder. 3. Press the Play button to enter a folder or play music. FM The GPS data logger allows you to listen to FM radio with the built-in digital FM tuner. Note: The earphones must be connected to the GPS data logger otherwise the FM tuner will not be able to scan any FM station.
GPS Walker User Manual Tuning into FM radio stations manually To tune manually, press the Left or Right button. Each time when the buttons are pressed, the GPS data logger changes the frequency by 0.1MHz. Advanced Settings To navigate the Settings menu, 1. Select Setting in the main menu and press the Play button. 2. Press the Up or Down button to choose a setting and press the Play button to enter the submenu. 3. After setting is finished, press the Menu button to go back to the previous menu.
GPS Walker User Manual Format the GPS data logger by using the Windows Format Tool 1. 2. 3. Connect the GPS data logger to the computer. Right click on the disk representing the GPS data logger. Select format and start the formatting process. Note: Do not select NTFS from the Format File System menu. Otherwise, the GPS data logger will not function, and you will need to format it again.
GPS Walker User Manual Before marking waypoints 1. Press the Menu button to enter main menu. 2. Select GPS in the main menu. 3. Power on the GPS function. Press the UP button to select GPS Power, select On, and then press the Play button to confirm. 4. Select GPS Signal in GPS menu. You will see some signal strength bars. The height of each bar represents the strength of the satellite signal. Wait until there are more than 3 bars appearing.
GPS Walker User Manual 1. Select Log Interval in the GPS menu, and then select an interval to set the time interval for GPS position logging. 2. Select Mini Speed in the GPS menu, and then select a speed to set a value as the minimum speed for position Logging. 3. The system will mark trace log automatically in the interval when the current speed is above the min speed. The data is logged in standard NMEA format (GPS_WPT.BIN) in folder GPS_DATA on the internal flash of the GPS device.
GPS Walker User Manual 5. Type a name for this group of log files and choose a place to save them by clicking “Browse”. z Select a file type which you want to transfer. z You can also delete these logs under this function. z Then click “Copy Logs to PC”. z The folder in which you saved your log files will be open automatically.
GPS Walker User Manual 6. Go to Google home page (http://www.google.com) and click “Maps”. Click “Maps” Note: You must register in Google website and sign in beforehand. 7. Go to Maps and click “My maps”.
GPS Walker User Manual 8. Go to My maps, and click “Get started”. Click “Get started” 9. Type map title, and then click “Import”. Then click “Import” Here we can customize the title 10. Click “Browse” to select map data. And then click “Upload from file”.
GPS Walker User Manual 11. Click “Done”. The waypoints will be shown on the Google map. This is one of the waypoints shown on the google map Download POIs and Viewing them on Google map z z z Input a file name. Click “Browse” to select a folder to save the POI. Choose a format. If you choose KML, the POIs can be viewed on Google earth directly; and you can also view them on Google map directly by marking the View on map. Note: You must download Google earth beforehand. z Click “Copy POIs to PC”.
GPS Walker User Manual Uploading POIs to GPS data logger z z z z Choose a waypoint in KML file from Google earth or other map application. You can choose Append POI to Device or Copy POI to Device Append POI to Device will append new mark points to device, maximum 1000 points, and mark points in device will be overwritten by choosing Copy POI to Device. You can set a POI as a destination by selecting Mark.
GPS Walker User Manual 17
GPS Walker User Manual Checking F/W version z The F/W information is shown in it Upgrading GPS Walker F/W z z z Connect with a PC. Run the MP3Updater.exe. After the device is shown, click “Start” Click “OK” after the Pass information is shown.
GPS Walker User Manual Battery z z z z For standalone applications, install a 1.5V AA battery into the battery compartment first. Changing the battery, if “LowPower” appears on screen or buttons do not response. The device shuts down automatically when the battery is low. The device playback, GPS on and standby time vary according to different types, brands and capacity of battery. Remove the battery to avoid damage caused by electrolyte leakage if the device is not going to be used for a long time.
GPS Walker User Manual GPS Data Logger Specifications Navigation features Point to point navigation Mark and Go Waypoints 1000 points Data logger 2,000,000 points Format support Google Earth KML format supported Standard GPX format supported GPS performance Chip Frequency Channels Update rate Acquisition time Position/Velocity SiRF Star III High Sensitivity L1 1575.
GPS Walker User Manual USB connector Earphone jack OS support Storage Capacity Mini USB 3.5mm Microsoft® Windows 2000/XP/Vista/Win 7 TM Built-in NAND flash Physical Size Weight Display 80 x 37.8 x 26.6 mm 35g (w/o battery) Mode Size Resolution Backlight Black/White, FSTN, Transflective 1.3inch (32mm x 16mm) 128W x 64H pixel Blue Environmental Operating temp. Storage temp.
