User's Manual

asset, co ta g 8 a a e batte es
HGC4 - a long life asset tracking device for pallet tracking, mounted in the pallet,
containing 4 C-cell alkaline batteries.
Please contact System Loco at systemloco.com for further details or technical assistance
Key Features
Easy to install, and pre-configured for use
Works indoors & outdoors
WiFi, LTE-CatM & 2G comms
NIST traceable temperature sensor
Detects LocoTags
Can beacon as a LocoTag
IP67 waterproof rating
Flight mode capability
Activation
Configure the device behaviour using the locoaware.com portal.
Click the button to turn the LocoTrack Primary device on and begin using.
Operation
The LocoTrack Primary was designed for simple operation.
There is only one button for the LocoTrack Primary. The button will activate the unit and force a
report. Once the button is pressed it will do a full report with GPS. The LED will indicate the
device's progress. With the device ‘on,’ it is ready to be used for its normal operation.
Please see LED patterns in the System Loco Knowledge Base for more details.
The HGD4 variant can be remotely de-activated on locoaware.com to preserver battery and re-
use the device for new shipments.
The LocoTrack Primary supports LocoTag BLE tag tracking capabilities. LocoTag association is
performed in the LocoAware application.
NOTE: Monitor the device behaviour with your login to the locoaware.com portal.
Operating Conditions
-20 degrees C to 55 degrees C
IP67
Operating Cycle