Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 17 SDS No. : 153476 V004.1 Revision: 04.11.2015 printing date: 23.12.2015 Replaces version from: 28.10.2015 518 Flange Slnt 50ml JCB SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier 518 Flange Slnt 50ml JCB Contains: Acrylic acid Cumene hydroperoxide 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Anaerobic Adhesive 1.3.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 2 of 17 Hazard pictogram: Signal word: Warning Hazard statement: H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. Supplemental information Contains 2-Hydroxyethyl methacrylate; Acetic acid, 2-phenylhydrazide. May produce an allergic reaction.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 3 of 17 Declaration of the ingredients according to CLP (EC) No 1272/2008: Hazardous components CAS-No. Acrylic acid 79-10-7 EC Number REACH-Reg No. 201-177-9 01-2119452449-31 Cumene hydroperoxide 80-15-9 content Classification 1- < 5 % Flam. Liq. 3 H226 Acute Tox. 4; Oral H302 Acute Tox. 4; Dermal H312 Skin Corr. 1A H314 Acute Tox. 4; Inhalation H332 STOT SE 3 H335 Aquatic Acute 1 H400 Aquatic Chronic 2 H411 201-254-7 1- < 2,5 % Acute Tox.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Skin contact: Rinse with running water and soap. Seek medical advice. Eye contact: Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary. Ingestion: Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor. 4.2. Most important symptoms and effects, both acute and delayed RESPIRATORY: Irritation, coughing, shortness of breath, chest tightness. EYE: Irritation, conjunctivitis.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 5 of 17 7.2. Conditions for safe storage, including any incompatibilities Store in original containers at 8-21°C (46.4-69.8°F) and do not return residual materials to containers as contamination may reduce the shelf life of the bulk product. 7.3.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 6 of 17 SECTION 8: Exposure controls/personal protection 8.1.
MSDS-No.: 153476 V004.
MSDS-No.: 153476 V004.
MSDS-No.: 153476 V004.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 10 of 17 Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 11 of 17 No data available / Not applicable SECTION 10: Stability and reactivity 10.1. Reactivity Reaction with strong oxidants. Reaction with strong acids. Reducing agents. 10.2. Chemical stability Stable under recommended storage conditions. 10.3. Possibility of hazardous reactions See section reactivity 10.4. Conditions to avoid No decomposition if used according to specifications. 10.5. Incompatible materials See section reactivity 10.6.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 12 of 17 Acute oral toxicity: Hazardous components CAS-No. Acrylic acid 79-10-7 Cumene hydroperoxide 80-15-9 Ethane-1,2-diol 107-21-1 Ethane-1,2-diol 107-21-1 Value type LD50 Value 1.500 mg/kg Route of application oral LD50 550 mg/kg oral Acute toxicity estimate (ATE) LD50 500 mg/kg oral Exposure time Species Method rat BASF Test rat Expert judgement > 2.000 mg/kg rat EU Method B.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 13 of 17 Germ cell mutagenicity: Hazardous components CAS-No. Result Acrylic acid 79-10-7 negative Cumene hydroperoxide 80-15-9 positive Cumene hydroperoxide 80-15-9 Ethane-1,2-diol 107-21-1 negative 2-Hydroxyethyl methacrylate 868-77-9 negative negative positive Type of study / Route of administration bacterial reverse mutation assay (e.g Ames test) bacterial reverse mutation assay (e.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Hazardous components CAS-No.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 15 of 17 12.2. Persistence and degradability Persistence and Biodegradability: The product is not biodegradable. Hazardous components CAS-No.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 16 of 17 Product disposal: Dispose of in accordance with local and national regulations. Contribution of this product to waste is very insignificant in comparison to article in which it is used Disposal of uncleaned packages: After use, tubes, cartons and bottles containing residual product should be disposed of as chemically contaminated waste in an authorised legal land fill site or incinerated.
MSDS-No.: 153476 V004.1 518 Flange Slnt 50ml JCB Page 17 of 17 SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: H226 Flammable liquid and vapor. H242 Heating may cause a fire. H301 Toxic if swallowed. H302 Harmful if swallowed. H312 Harmful in contact with skin. H314 Causes severe skin burns and eye damage. H315 Causes skin irritation.
