Safety Data Sheet according to (EC) No 1907/2006 as amended Page 1 of 17 SDS No. : 164824 V007.0 Revision: 08.02.2021 printing date: 09.02.2021 Replaces version from: 28.05.2019 LOCTITE SI 5368 BK CR310ML EGF SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier LOCTITE SI 5368 BK CR310ML EGF 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Silicone sealant 1.3.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 2 of 17 Hazard statement: H315 Causes skin irritation. H319 Causes serious eye irritation. H410 Very toxic to aquatic life with long lasting effects. Precautionary statement: Prevention P273 Avoid release to the environment. Precautionary statement: Response P337+P313 If eye irritation persists: Get medical advice/attention. P302+P352 IF ON SKIN: Wash with plenty of soap and water. 2.3. Other hazards Evolves acetic acid during cure.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Skin contact: Rinse with running water and soap. Obtain medical attention if irritation persists. Eye contact: Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist. Ingestion: Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor. 4.2. Most important symptoms and effects, both acute and delayed SKIN: Redness, inflammation. EYE: Irritation, conjunctivitis. 4.3.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 4 of 17 7.1. Precautions for safe handling See advice in section 8 Ensure that workrooms are adequately ventilated. Avoid skin and eye contact. Hygiene measures: Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Good industrial hygiene practices should be observed. 7.2. Conditions for safe storage, including any incompatibilities Store in a cool, well-ventilated place.
SDS No.: 164824 V007.
SDS No.: 164824 V007.
SDS No.: 164824 V007.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 8 of 17 Advices to personal protection equipment: The information provided on personal protective equipment is for guidance purposes only. A full risk assessment should be conducted prior to using this product to determine the appropriate personal protective equipment to suit local conditions. Personal protective equipment should conform to the relevant EN standard. SECTION 9: Physical and chemical properties 9.1.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 9 of 17 10.5. Incompatible materials See section reactivity. 10.6. Hazardous decomposition products At higher temperatures (>150C) may release formaldehyde (traces). Evolves acetic acid during cure. SECTION 11: Toxicological information General toxicological information: Acetic acid is liberated slowly upon contact with moisture. Acetic acid released during polymerisation of acetoxy curing RTV silicones is irritating to the eyes 11.1.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 10 of 17 Acute inhalative toxicity: The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances Value CAS-No.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 11 of 17 Germ cell mutagenicity: The mixture is classified based on threshold limits referring to the classified substances present in the mixture. Hazardous substances CAS-No.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 12 of 17 Reproductive toxicity: The mixture is classified based on threshold limits referring to the classified substances present in the mixture. Hazardous substances CAS-No.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 13 of 17 SECTION 12: Ecological information General ecological information: Cured Loctite products are typical polymers and do not pose any immediate environmental hazards. In the cured state contribution of this product to Environmental Hazards is insignificant in comparison to articles in which it is used. Precautions required with respect to Environmental Hazards of articles in which this product is used should be considered.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 14 of 17 The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances CAS-No. octamethylcyclotetrasiloxane 556-67-2 Value type EC50 Value Exposure time Species Method Toxicity > Water solubility 96 h EPA OTS 797.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Hazardous substances CAS-No. octamethylcyclotetrasiloxane 556-67-2 Decamethylcyclopentasiloxan e 541-02-6 Dodecamethylcyclohexasiloxa ne 540-97-6 Page 15 of 17 LogPow Temperature Method 6,488 25,1 °C 8,023 25,3 °C OECD Guideline 123 (Partition Coefficient (1-Octanol / Water), SlowStirring Method) OECD Guideline 123 (Partition Coefficient (1-Octanol / Water), SlowStirring Method) 8,87 23,6 °C other guideline: 12.5.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 16 of 17 SECTION 14: Transport information 14.1. UN number ADR RID ADN IMDG IATA 14.2. UN proper shipping name ADR RID ADN IMDG IATA 14.3. III III III III III Environmental hazards ADR RID ADN IMDG IATA 14.6. 9 9 9 9 9 Packing group ADR RID ADN IMDG IATA 14.5. ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (octamethylcyclotetrasiloxane) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
SDS No.: 164824 V007.0 LOCTITE SI 5368 BK CR310ML EGF Page 17 of 17 SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture Ozone Depleting Substance (ODS) (Regulation 1005/2009/EC): Prior Informed Consent (PIC) (Regulation 649/2012/EC): Persistent Organic Pollutants (POPs) (Regulation 2019/1021/EC) : Not applicable Not applicable Not applicable EU.