Certifications 2

MSDS-No.: 164824
V004.0
LOCTITE SI 5368 BK CR310ML EGF
Page 3 of 10
Extinguishing media which must not be used for safety reasons:
High pressure waterjet
5.2. Special hazards arising from the substance or mixture
Do not expose to direct heat.
In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released.
carbon oxides.
Silica fume
Formaldehyde
5.3. Advice for firefighters
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Additional information:
In case of fire, keep containers cool with water spray.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Avoid contact with skin and eyes.
Ensure adequate ventilation.
Wear protective equipment.
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
For small spills wipe up with paper towel and place in container for disposal.
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Avoid skin and eye contact.
See advice in section 8
Hygiene measures:
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
Good industrial hygiene practices should be observed.
7.2. Conditions for safe storage, including any incompatibilities
Store in a cool, well-ventilated place.
Never allow product to get in contact with water during storage
7.3. Specific end use(s)
Silicone sealant