Certifications 2

ManualsBrandsLOCTITE® ManualsBuilding Technology & Smart LivingLOCTITE® 6300 Bonding material 1546952 50 ml

Safety Data Sheet according to (EC) No 1907/2006

Page 1 of 7

LOCTITE 6300

SDS No. : 551100

V001.0

Revision: 25.08.2015

printing date: 29.01.2016

Replaces version from: -

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

LOCTITE 6300

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use:

Adhesive

1.3. Details of the supplier of the safety data sheet

Henkel Ltd

Wood Lane End

HP2 4RQ

Hemel Hempstead

Great Britain

Phone:

+44 1442 278000

Fax-no.:

+44 1442 278071

ua-productsafety.uk@uk.henkel.com

1.4. Emergency telephone number

24 Hours Emergency Tel: +44 (0)1442 278497

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

2.2. Label elements

Label elements (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

2.3. Other hazards

None if used properly.

SECTION 3: Composition/information on ingredients

3.2. Mixtures

General chemical description:

Anaerobic adhesive

Summary of content (7 pages)

PAGE 1
Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 7 SDS No. : 551100 V001.0 Revision: 25.08.2015 printing date: 29.01.2016 Replaces version from: - LOCTITE 6300 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier LOCTITE 6300 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Adhesive 1.3.
PAGE 2
MSDS-No.: 551100 V001.0 LOCTITE 6300 Declaration of the ingredients according to CLP (EC) No 1272/2008: Contains no dangerous substances exceeding the limits of the EU-Regulation SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Move to fresh air. If symptoms persist, seek medical advice. Skin contact: Rinse with running water and soap. Seek medical advice. Eye contact: Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.
PAGE 3
MSDS-No.: 551100 V001.0 LOCTITE 6300 Page 3 of 7 SECTION 7: Handling and storage 7.1. Precautions for safe handling Use only in well-ventilated areas. Avoid skin and eye contact. Prolonged or repeated skin contact should be avoided to minimise any risk of sensitisation. Hygiene measures: Good industrial hygiene practices should be observed. Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. 7.2.
PAGE 4
MSDS-No.: 551100 V001.0 LOCTITE 6300 Page 4 of 7 Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.
PAGE 5
MSDS-No.: 551100 V001.0 LOCTITE 6300 Page 5 of 7 10.3. Possibility of hazardous reactions See section reactivity 10.4. Conditions to avoid Stable 10.5. Incompatible materials None if used properly. 10.6. Hazardous decomposition products carbon oxides. nitrogen oxides Irritating organic vapours. SECTION 11: Toxicological information 11.1.
PAGE 6
MSDS-No.: 551100 V001.0 LOCTITE 6300 Page 6 of 7 Bioaccumulative potential: No data available. 12.5. Results of PBT and vPvB assessment No data available. 12.6. Other adverse effects No data available. SECTION 13: Disposal considerations 13.1. Waste treatment methods Product disposal: Dispose of in accordance with local and national regulations.
PAGE 7
MSDS-No.: 551100 V001.0 LOCTITE 6300 Page 7 of 7 15.2. Chemical safety assessment A chemical safety assessment has not been carried out. SECTION 16: Other information Further information: This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.