Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 12 SDS No. : 417465 V001.8 Revision: 01.06.2015 printing date: 14.01.2016 Replaces version from: 13.02.2015 Loctite 9466A Kit component SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Loctite 9466A Kit component Contains: Reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight <= 700) RP Bisphenol F-epichlorohydrin resin, MW<=700 1.2.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component Page 2 of 12 Hazard pictogram: Signal word: Warning Hazard statement: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects. Precautionary statement: Prevention P273 Avoid release to the environment. P280 Wear protective gloves. Precautionary statement: Response P302+P352 IF ON SKIN: Wash with plenty of water.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component Eye contact: Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist. Ingestion: Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor. 4.2. Most important symptoms and effects, both acute and delayed SKIN: Redness, inflammation. SKIN: Rash, Urticaria. EYE: Irritation, conjunctivitis. 4.3.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component Page 4 of 12 Hygiene measures: Do not eat, drink or smoke while working. Good industrial hygiene practices should be observed. Wash hands before work breaks and after finishing work. 7.2. Conditions for safe storage, including any incompatibilities Store in sealed original container. Store in a cool, well-ventilated place. 7.3. Specific end use(s) Epoxy adhesive SECTION 8: Exposure controls/personal protection 8.1.
MSDS-No.: 417465 V001.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component Page 6 of 12 Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component Page 7 of 12 10.3. Possibility of hazardous reactions See section reactivity 10.4. Conditions to avoid No decomposition if used according to specifications. Avoid contact with acids and oxidizing agents. 10.5. Incompatible materials See section reactivity 10.6. Hazardous decomposition products None if used for intended purpose. SECTION 11: Toxicological information 11.1.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component Page 8 of 12 Skin corrosion/irritation: Hazardous components CAS-No.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component Hazardous components CAS-No.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component Page 10 of 12 SECTION 13: Disposal considerations 13.1. Waste treatment methods Product disposal: Dispose of in accordance with local and national regulations. Disposal of uncleaned packages: After use, tubes, cartons and bottles containing residual product should be disposed of as chemically contaminated waste in an authorised legal land fill site or incinerated.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component RID ADN IMDG IATA 14.7. Tunnelcode: (E) not applicable not applicable not applicable not applicable Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code not applicable SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture VOC content <3% (2010/75/EC) 15.2. Chemical safety assessment A chemical safety assessment has not been carried out.
MSDS-No.: 417465 V001.8 Loctite 9466A Kit component Page 12 of 12 SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects.
Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 9 SDS No. : 152810 V003.4 Revision: 21.05.2015 printing date: 14.01.2016 Replaces version from: 10.02.2015 Loctite 9466B Kit component SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Loctite 9466B Kit component Contains: 3,3'-Oxybis(ethyleneoxy)bis(propylamine) 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Epoxy Hardener 1.3.
MSDS-No.: 152810 V003.4 Loctite 9466B Kit component Page 2 of 9 Precautionary statement: Prevention P280 Wear protective gloves/protective clothing/eye protection/face protection. Precautionary statement: Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing.
MSDS-No.: 152810 V003.4 Loctite 9466B Kit component 5.2. Special hazards arising from the substance or mixture In case of fire, keep containers cool with water spray. carbon oxides. 5.3. Advice for firefighters Wear self-contained breathing apparatus. Wear protective equipment. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation. Avoid skin and eye contact. Wear protective equipment. 6.2.
MSDS-No.: 152810 V003.4 Loctite 9466B Kit component Page 4 of 9 Biological Exposure Indices: None 8.2. Exposure controls: Engineering controls: Ensure good ventilation/extraction. Respiratory protection: Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A Hand protection: Chemical-resistant protective gloves (EN 374).
MSDS-No.: 152810 V003.4 Loctite 9466B Kit component Vapor density Oxidising properties Page 5 of 9 No data available / Not applicable No data available / Not applicable 9.2. Other information No data available / Not applicable SECTION 10: Stability and reactivity 10.1. Reactivity Reacts with water: generation of heat. 10.2. Chemical stability Stable under recommended storage conditions. 10.3. Possibility of hazardous reactions See section reactivity 10.4.
MSDS-No.: 152810 V003.4 Loctite 9466B Kit component Page 6 of 9 Acute dermal toxicity: Hazardous components CAS-No. 3,3'Oxybis(ethyleneoxy)bis(p ropylamine) 4246-51-9 Value type LD50 Value 2.500 mg/kg Route of application dermal Exposure time Species Method rabbit Skin corrosion/irritation: Hazardous components CAS-No.
MSDS-No.: 152810 V003.4 Loctite 9466B Kit component Page 7 of 9 No data available. 12.6. Other adverse effects No data available. SECTION 13: Disposal considerations 13.1. Waste treatment methods Product disposal: Dispose of in accordance with local and national regulations. Disposal of uncleaned packages: After use, tubes, cartons and bottles containing residual product should be disposed of as chemically contaminated waste in an authorised legal land fill site or incinerated.
MSDS-No.: 152810 V003.4 Loctite 9466B Kit component SECTION 14: Transport information 14.1. UN number ADR RID ADN IMDG IATA 14.2. UN proper shipping name ADR RID ADN IMDG IATA 14.3. not applicable not applicable not applicable not applicable not applicable Special precautions for user ADR RID ADN IMDG IATA 14.7. II II II II II Environmental hazards ADR RID ADN IMDG IATA 14.6. 8 8 8 8 8 Packaging group ADR RID ADN IMDG IATA 14.5. AMINES, LIQUID, CORROSIVE, N.O.S.
MSDS-No.: 152810 V003.4 Loctite 9466B Kit component Page 9 of 9 (1999/13/EC) 15.2. Chemical safety assessment A chemical safety assessment has not been carried out. SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: H314 Causes severe skin burns and eye damage.
