Safety data sheet

MSDS-No.: 499863
V003.0
LOCTITE 2400 NEW GENERATION BUL
Page 3 of 7
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Use only in well-ventilated areas.
Avoid skin and eye contact.
Prolonged or repeated skin contact should be avoided to minimise any risk of sensitisation.
See advice in section 8
Hygiene measures:
Good industrial hygiene practices should be observed.
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
7.2. Conditions for safe storage, including any incompatibilities
Store in a cool, dry place.
Store in original container at temperatures 8 - 21°C. (46.4 - 69.8°F)
Refer to Technical Data Sheet
7.3. Specific end use(s)
Anaerobic Adhesive
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational Exposure Limits
Valid for
Great Britain
Ingredient [Regulated substance]
ppm
mg/m
3
Value type
Short term exposure limit
category / Remarks
Regulatory list
Ethene, homopolymer
9002-88-4
[DUST, INHALABLE DUST]
10
Time Weighted Average
(TWA):
EH40 WEL
Ethene, homopolymer
9002-88-4
[DUST, RESPIRABLE DUST]
4
Time Weighted Average
(TWA):
EH40 WEL
Occupational Exposure Limits
Valid for
Ireland
Ingredient [Regulated substance]
ppm
mg/m
3
Value type
Short term exposure limit
category / Remarks
Regulatory list
Ethene, homopolymer
9002-88-4
[DUSTS, NON-SPECIFIC, RESPIRABLE]
4
Time Weighted Average
(TWA):
IR_OEL
Ethene, homopolymer
9002-88-4
[DUSTS, NON-SPECIFIC, TOTAL
INHALABLE]
10
Time Weighted Average
(TWA):
IR_OEL
Biological Exposure Indices:
None
8.2. Exposure controls:
Engineering controls:
Ensure good ventilation/extraction.