Safety data sheet

ManualsBrandsLOCTITE® ManualsBolts & NutsScrew locking varnish Strength: medium 50 ml 2400

Safety Data Sheet according to (EC) No 1907/2006

Page 1 of 7

LOCTITE 2400

SDS No. : 499863

V001.2

Revision: 09.09.2015

printing date: 12.01.2016

Replaces version from: 12.08.2014

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

LOCTITE 2400

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use:

Anaerobic Adhesive

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use:

Sample only.

1.3. Details of the supplier of the safety data sheet

Henkel Ltd

Wood Lane End

HP2 4RQ

Hemel Hempstead

Great Britain

Phone:

+44 1442 278000

Fax-no.:

+44 1442 278071

ua-productsafety.uk@uk.henkel.com

1.4. Emergency telephone number

24 Hours Emergency Tel: +44 (0)1442 278497

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

2.2. Label elements

Label elements (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

Summary of content (7 pages)

PAGE 1
Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 7 SDS No. : 499863 V001.2 Revision: 09.09.2015 printing date: 12.01.2016 Replaces version from: 12.08.2014 LOCTITE 2400 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier LOCTITE 2400 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Anaerobic Adhesive 1.2.
PAGE 2
MSDS-No.: 499863 V001.2 LOCTITE 2400 SECTION 3: Composition/information on ingredients 3.2. Mixtures General chemical description: Anaerobic adhesive Declaration of the ingredients according to CLP (EC) No 1272/2008: Contains no dangerous substances exceeding the limits of the EU-Regulation SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Move to fresh air. If symptoms persist, seek medical advice. Skin contact: Rinse with running water and soap. Seek medical advice.
PAGE 3
MSDS-No.: 499863 V001.2 LOCTITE 2400 Page 3 of 7 6.2. Environmental precautions Do not let product enter drains. 6.3. Methods and material for containment and cleaning up For small spills wipe up with paper towel and place in container for disposal. For large spills absorb onto inert absorbent material and place in sealed container for disposal. 6.4. Reference to other sections See advice in section 8 SECTION 7: Handling and storage 7.1. Precautions for safe handling Use only in well-ventilated areas.
PAGE 4
MSDS-No.: 499863 V001.2 LOCTITE 2400 Page 4 of 7 Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.
PAGE 5
MSDS-No.: 499863 V001.2 LOCTITE 2400 Page 5 of 7 10.3. Possibility of hazardous reactions See section reactivity 10.4. Conditions to avoid No decomposition if used according to specifications. 10.5. Incompatible materials See section reactivity 10.6. Hazardous decomposition products carbon oxides. nitrogen oxides Irritating organic vapours. SECTION 11: Toxicological information 11.1.
PAGE 6
MSDS-No.: 499863 V001.2 LOCTITE 2400 Page 6 of 7 Bioaccumulative potential: Does not bioaccumulate. 12.5. Results of PBT and vPvB assessment No data available. 12.6. Other adverse effects No data available. SECTION 13: Disposal considerations 13.1. Waste treatment methods Product disposal: Dispose of in accordance with local and national regulations.
PAGE 7
MSDS-No.: 499863 V001.2 LOCTITE 2400 Page 7 of 7 15.2. Chemical safety assessment A chemical safety assessment has not been carried out. SECTION 16: Other information Further information: This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.