Safety data sheet

MSDS-No.: 499863
V001.2
LOCTITE 2400
Page 3 of 7
6.2. Environmental precautions
Do not let product enter drains.
6.3. Methods and material for containment and cleaning up
For small spills wipe up with paper towel and place in container for disposal.
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Use only in well-ventilated areas.
Avoid skin and eye contact.
Prolonged or repeated skin contact should be avoided to minimise any risk of sensitisation.
Hygiene measures:
Good industrial hygiene practices should be observed.
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
7.2. Conditions for safe storage, including any incompatibilities
Store in a cool, dry place.
Store in original container at temperatures 8 - 21°C. (46.4 - 69.8°F)
Refer to Technical Data Sheet
7.3. Specific end use(s)
Anaerobic Adhesive
Sample only.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational Exposure Limits
Valid for
Great Britain
None
Occupational Exposure Limits
Valid for
Ireland
None
Biological Exposure Indices:
None
8.2. Exposure controls:
Respiratory protection:
Ensure adequate ventilation.
An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly
ventilated area
Filter type: A