Instructions / Assembly

Revision: April 26, 2018
Supersedes: August 30, 2016
Ref. #: 248643 / 352971
TECHNICAL DATA SHEET
Loctite® Epoxy Plastic
Page 1 of 3
Loctite ® Epoxy Plastic is a two-part adhesive consisting of an epoxy resin and a hardener. When
mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond
in 5 minutes for most projects. Available in a convenient dual syringe which delivers equal parts of
both components every time. Loctite Epoxy Plastic can be used as an adhesive for a wide range of
plastic materials or as a versatile filler for gap filling, surface repairs and laminating. Loctite Epoxy
Plastic does not shrink and is resistant to water and most common solvents. It can be tinted with
earth pigments, cement or sand for color matching. It can be sanded and drilled.
Loctite Epoxy Plastic can be used for bonding ABS, fiberglass, hard plastics, PVC & many other
plastics.
▪ Not recommended for polyethylene, polypropylene, non-stick coatings, nylon products or
flexible materials.
▪ Do not use in applications requiring short term heat exposure greater than 302°F (150°C).
▪ Do not use in applications where the bonds will be exposed to continuous water immersion
or continuously wet areas.
▪ Do not use in potable water systems.
Feature
Benefits
Machinable.…………….................................
Will not crack when drilled
Water resistant……………………………….…
Great for interior and exterior projects
Sets in 4 to 10 minutes………………………...
Quick completion of projects
Convenient syringe…………………..….
Dispenses equal amounts of each component
Typical Uncured Physical Properties
Typical Application Properties
Color:
Hardener: Light yellow
Resin: Colorless
Application Temperature:
39°F (4°C) to 95°F (35°C)
Base:
Epoxy resin / Polymercaptan hardener
Odor:
Mild amine
Specific Gravity:
Hardener: 1.04
Resin: 1.17
Gel Time: (5g:5g)
4 to 10 minutes*
Flashpoint:
Hardener: >200°F (93°C)
Resin: >480°F (249°C)
Usable Strength:
1 hour*
VOC Content:
0.1% by weight, CARB (resin & hardener)
Full Cure Time:
24 hours*
Shelf Life:
24 months (from date of manufacture,
unopened)
*Time is based on temperature, humidity, and thickness of epoxy
applied
Lot Code Explanation:
LB7FAC56 (Example)
7 = Last digit in the year of manufacture
7 = 2017
F = Month produced (see chart on right)
F = June
June 2017 is the date of manufacture
A – January
B – February
C – March
D – April
E – May
F – June
G – July
H – August
J – September (there is no I)
K – October
L – November
M – December
Item #
Package
Size
1360788
Carded
Syringe
0.85 fl. oz.
DESCRIPTION:
RECOMMENDED FOR:
FEATURES & BENEFITS:
LIMITATIONS:
EPOXY PLASTIC
Henkel Corporation
Professional and Consumer Adhesives
Rocky Hill, CT
Phone [phone]
www.henkel.com www.loctiteproducts.com
TECHNICAL DATA