MSDS

ManualsBrandsLoctite ManualsPaint0.85 fl. oz. Metal and Concrete Epoxy (8-Pack)

Material Safety Data Sheet

Revision Number: 001.1 Issue date: 03/15/2010

IDH number: 1405605 Product name: Loctite Metal/Concrete Epoxy- Resin

Page 1 of 5

1. PRODUCT AND COMPANY IDENTIFICATION

Product name:

Loctite Metal/Concrete Epoxy- Resin

Product type:

Epoxy resin

Item number:

1405605

Region:

United States

Company address: Contact information:

Henkel Corporation

One Henkel Way

Rocky Hill, Connecticut 06067

Telephone: 800.624.7767

Emergency telephone: 8

00.424.9300

Internet: www.henkelna.com

2. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW

HMIS:

Physical state:

Liquid, Paste

HEALTH:

Color:

Grey, Metallic

FLAMMABILITY:

Odor:

Slight

PHYSICAL HAZARD:

Personal Protection:

See MSDS Section 8

WARNING: MAY CAUSE ALLERGIC SKIN REACTION.

CAUSES EYE AND SKIN IRRITATION.

MAY CAUSE RESPIRATORY TRACT IRRITATION.

Relevant routes of exposure:

Skin, Inhalation, Eyes

Potential Health Effects

Inhalation:

May cause respiratory tract irritation. Coughing.

Skin contact:

May cause allergic skin reaction. Causes skin irritation. Redness.

Eye contact:

Causes eye irritation. Direct contact may cause temporary redness and discomfort.

Ingestion:

Not expected to be harmful by ingestion.

Existing conditions aggravated by

exposure:

Asthma. Skin allergies. Skin disorders. Eye disorders.

This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR

1910.1200).

See Section 11 for additional toxicological information.

3. COMPOSITION / INFORMATION ON INGREDIENTS

Hazardous components CAS NUMBER %

Epichlorohydrin-4,4'-isopropylidene diphenol resin 25068-38-6 30 - 60

Calcium carbonate 471-34-1 30 - 60

Aluminum 7429-90-5 1 - 5

Quartz (SiO2) 14808-60-7 0.1 - 1

4. FIRST AID MEASURES

Inhalation:

Move to fresh air. If not breathing, give artificial respiration. If breathing is

difficult, give oxygen. Get medical attention.

Skin contact:

Immediately flush skin with plenty of water (using soap, if available). Remove

contaminated clothing and footwear. Wash clothing before reuse. Get medical

attention.

Summary of content (10 pages)

PAGE 1
Material Safety Data Sheet Revision Number: 001.1 Issue date: 03/15/2010 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: Loctite Metal/Concrete Epoxy- Resin Epoxy resin Company address: Henkel Corporation One Henkel Way Rocky Hill, Connecticut 06067 Item number: 1405605 Region: United States Contact information: Telephone: 800.624.7767 Emergency telephone: 800.424.9300 Internet: www.henkelna.com 2.
PAGE 2
Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention. Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention. 5. FIRE FIGHTING MEASURES Flash point: > 96.
PAGE 3
Hazardous components ACGIH TLV Epichlorohydrin-4,4'-isopropylidene diphenol resin Calcium carbonate Aluminum Quartz (SiO2) OSHA PEL AIHA WEEL OTHER None None None None None None None None None None 5 mg/m3 TWA 10 mg/m3 TWA Respirable fraction. Total dust. 15 mg/m3 TWA Total dust. 15 mg/m3 TWA (as Al) Total dust. 1 mg/m3 TWA 5 mg/m3 TWA (as Respirable fraction. Al) Respirable dust. 2.4 MPPCF TWA Respirable. 0.025 mg/m3 TWA 0.1 mg/m3 TWA Respirable fraction. Respirable. 0.
PAGE 4
11. TOXICOLOGICAL INFORMATION Hazardous components Epichlorohydrin-4,4'-isopropylidene diphenol resin Calcium carbonate Aluminum Quartz (SiO2) OSHA Carcinogen NTP Carcinogen IARC Carcinogen No No No No No Known carcinogen.
PAGE 5
California Proposition 65: This product contains a chemical known in the State of California to cause cancer. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Canada Regulatory Information CEPA DSL/NDSL Status: WHMIS hazard class: All components are listed on or are exempt from listing on the Canadian Domestic Substances List. D.2.A, D.2.B 16.
PAGE 6
Material Safety Data Sheet Revision Number: 001.2 Issue date: 03/15/2010 1. PRODUCT AND COMPANY IDENTIFICATION Loctite Metal/Concrete Epoxy- Hardener Item number: Epoxy Hardener 1405605 Region: United States Company address: Contact information: Henkel Corporation Telephone: 800.624.7767 One Henkel Way Emergency telephone: 800.424.9300 Rocky Hill, Connecticut 06067 Product name: Product type: 2.
PAGE 7
4. FIRST AID MEASURES Inhalation: Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Thoroughly clean shoes before reuse. If symptoms develop and persist, get medical attention. Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes.
PAGE 8
. EXPOSURE CONTROLS / PERSONAL PROTECTION Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure controls and protective equipment for each task performed.
PAGE 9
10. STABILITY AND REACTIVITY Stability: Stable Hazardous reactions: Will not occur. Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen. Irritating organic fragments. Incompatible materials: Strong acids and strong bases. Strong oxidizing agents. Conditions to avoid: Excessive heat. Store away from incompatible materials. 11.
PAGE 10
Water Transportation (IMO/IMDG) Proper shipping name: Hazard class or division: Identification number: Packing group: AMINES, LIQUID, CORROSIVE, N.O.S. (m-Xylylenediamine) 8 UN 2735 III 15. REGULATORY INFORMATION United States Regulatory Information TSCA 8 (b) Inventory Status: TSCA 12(b) Export Notification: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.