SDS

IDH number: 1872130
Product name: Loctite Go2 Gel
Page 2 of 6
3. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Component(s)
CAS Number
Percentage*
Silica, amorphous, fumed, crystal-free
112945-52-5
1 - 10
Trimethoxyvinylsilane
2768-02-7
1 - 5
N-(3-
(Trimethoxysilyl)propyl)ethylenediamine
1760-24-3
0.1 - 1
Bis(2,2,6,6-tetramethyl-4-piperidyl)
sebacate
52829-07-9
0.1 - 1
1,8-Diazabicyclo[5.4.0]undec-7-ene
6674-22-2
0.1 - 1
Methanol
67-56-1
0.1 - 1
Ethyltrimethoxysilane
5314-55-6
0.1 - 1
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
4. FIRST AID MEASURES
Inhalation:
Move to fresh air. If symptoms persist, seek medical advice.
Skin contact:
Wash with soap and water. Obtain medical attention if irritation persists.
Eye contact:
Flush eyes with plenty of water for at least 5 minutes. If irritation persists seek
medical attention.
Ingestion:
If material is ingested, immediately contact a physician or poison control
center. Do not induce vomiting.
Symptoms:
See Section 11.
5. FIRE FIGHTING MEASURES
Extinguishing media:
Water spray (fog), foam, dry chemical or carbon dioxide.
Special firefighting procedures:
Wear protective equipment. Wear self contained breathing apparatus.
Unusual fire or explosion hazards:
None
Hazardous combustion products:
Acrid smoke and fumes. Oxides of carbon. Silicon dioxide Calcium oxide.
6. ACCIDENTAL RELEASE MEASURES
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected
personnel.
Environmental precautions:
Do not allow product to enter sewer or waterways.
Clean-up methods:
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder,
universal binder, sawdust). Store in a closed container until ready for disposal.