MSDS

IDH number: 1508197 Product name: Loctite Polyseamseal® Ultra Exterior White Sealant
Page 3 of 5
Hazardous components ACGIH TLV OSHA PEL AIHA WEEL OTHER
Limestone
10 mg/m3 TWA
Total dust.
5 mg/m3 TWA
Respirable fraction.
15 mg/m3 TWA
Total dust.
None None
Titanium dioxide 10 mg/m3 TWA
15 mg/m3 TWA
Total dust.
None None
Ethylene glycol
100 mg/m3 Ceiling
Aerosol.
None None None
Quartz (SiO2)
0.025 mg/m3 TWA
Respirable fraction.
2.4 MPPCF TWA
Respirable.
0.1 mg/m3 TWA
Respirable.
0.3 mg/m3 TWA
Total dust.
None None
Engineering controls: Use local ventilation if general ventilation is insufficient to maintain vapor
concentration below established exposure limits.
Respiratory protection: No personal respiratory protective equipment normally required.
Eye/face protection: None required in normal use.
Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin
contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state: pasty
Color: white
Odor: Acetic acid
Odor threshold: Not available
pH: 7.2 - 7.8
Vapor pressure: 15 mm hg (20.0 °C (68°F))
Boiling point/range: 100 °C (212°F)
Melting point/ range: Not available
Specific gravity: 1.224
Vapor density: Heavier than air
Flash point: Not available
Flammable/Explosive limits - lower: Not available
Flammable/Explosive limits - upper: Not available
Autoignition temperature: Not available
Evaporation rate: < 0.6 (Butyl acetate = 1)
Solubility in water: Soluble
Partition coefficient (n-octanol/water): Not available
VOC content: < 0.1 %; < 5 g/l (calculated)
10. STABILITY AND REACTIVITY
Stability: Stable under normal conditions of storage and use.
Hazardous reactions: Will not occur.
Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen.
Incompatible materials: Not available
Conditions to avoid: Do not freeze.