Technical Specifications


Loctite® PL® 400® Subfloor
All Weather Construction Adhesive
Page 1 of 4



 
Description: Loctite® PL® 400® Subfloor All Weather features superior bonding capabilities for heavy
duty subfloor construction. Loctite PL 400 Subfloor All Weather is specifically formulated for extreme
temperatures performance. It guns easily in temperatures as low as 18°F and as high as 120°F. PL 400
Subfloor All Weather bonds to dry, wet, or frozen lumber. The Low VOC formulation meets stringent State
and Federal VOC regulations.
Available As:
Item # Size Color
1907194 10 fl oz (295 ml) Tan
1907193 28 fl oz (828 ml) Tan
Features & Benefits:
 Bonds to Wet, Frozen & Treated Lumber
 Weather Resistant
 Guns Easily from 18°F to 120°F
 Bridges Minor Gaps in Framing
 Low VOC Content
 Water Clean-Up of Uncured Adhesive
Recommended For:
Loctite PL 400 Subfloor All Weather Construction Adhesive is primarily used for interior (unoccupied) or exterior construction.
Suitable for glued floor projects involving subfloor, tongue-and-groove flooring, glued floor systems, and standard wood deck
construction. Offers excellent adhesion for all types of wood to wood assemblies, concrete, masonry and metal.
For Best Results:
 Do not use on expanded or extruded polystyrene foam
 Do not use on tub surrounds
 Do not use outdoors if rain is expected within 24 hours or if extended freezing temperatures are expected
 Not suitable for permanent water immersion
 Test adhesion to treated wood before using in application. Treatments vary widely and can adversely impact performance.
Coverage:
For a 10 fl. oz. (295 mL) cartridge:
 A 1/4” (6 mm) bead extrudes approximately 31 ft. (9.3 m)
 A 3/8” (9.5 mm) bead extrudes approximately 13.6 ft. (4.1 m)
For a 28 fl. oz. (828 mL) cartridge:
 A 1/4” (6 mm) bead extrudes approximately 86 ft. (26 m)
 A 3/8” (9.5 mm) bead extrudes approximately 38 ft. (12 m)
PL400SubfloorAllWeather