Technical Specifications


Loctite® Power Grab® Express All-Purpose
1 Gallon Interior Construction Adhesive
Page 2 of 4
Typical Uncured
Physical Properties:
Color: White
Appearance: Thick paste
Base: Synthetic latex
Odor: Minimal
Specific Gravity: 1.3
pH: 7.3 to 8.5
Flashpoint: >200°F (93°C)
Viscosity: > 2000 Mcps At 5 rpm
% Solids by Weight: 66.4%
VOC Content: 0.1% by weight CARB
14 g/l SCAQMD rule 1168
Shelf Life: 12 months from date of manufacture (unopened)
Lot Code Explanation: YYDDD
YY= Last two digits of year of manufacture
DDD= Day of manufacture based on 365 days in a year
Example: 15061 = 61
st
day of 2015 = March 2, 2015
Typical Application
Properties:
Application Temperature: Apply and cure above 50°F (10°C)
Open Time: 20 minutes* At 77°F (25°C)
Repositioning Time: 15 minutes*
Initial Dry Time: 12 hours At 77°F (25°C) and 50% RH
Cure Time: Most applications achieve full strength in 12 hours. Applications on low porosity surfaces may
take 7 days or longer to achieve full strength*.
*Time is dependent on temperature, humidity, porosity of substrate and amount of adhesive
applied
Initial Tack: 25 g/cm²
Extrusion: 6 lbs/minute At 73°F (23°C)
Typical Cured
Performance Properties:
Color: White
Cured Form: Non-flammable solid
Service Temperature: 0°F (-18°C) to 122°F (50°C)
Water Resistant: Yes when fully cured
Paintable: Yes
Sandable: No
Shear Strength:
Wood to Wood:
Wood to Aluminum:
Wood to PVC:
870 to 1160 psi
870 to 1160 psi
435 to 725 psi
DIN EN 205
Shear Strength:
Dry Lumber:
Wet Lumber:
326 psi
467 psi
APA AFG 01
Specifications: GreenGuard certified










