Technical Specifications


Loctite® Super Glue Precision Pen
Page 2 of 3
Typical Uncured
Physical Properties:
Color: Clear and colorless
Appearance: Gel
Base: Ethyl cyanoacrylate
Odor: Sharp, irritating (use in well-ventilated area)
Specific Gravity: 1.05
Flash Point: 176 to 199°F (80 to 93°C)
VOC Content: < 2 % by weight CARB
< 20 g/l SCAQMD rule 1168
Shelf Life: 18 months from date of manufacture (unopened)
Lot Code Format:
Printed on back of blister card
YYMMDDXX
YY = Last two digits of year of manufacture
MM = Month of manufacture
DD = Day of manufacture
XX = Disregard
For example: 15112303 = Product was manufactured November 23, 2015
Typical Application
Properties:
Application Temperature: Apply above 50°F (10°C)
Fixture Time: 15 to 30 seconds*
Handling Time: Leave undisturbed for at least 5 minutes.
For best results, allow full bond strength to develop overnight before handling.
Cure Time: 12 to 24 hours*
*Times are dependent on temperature, humidity, porosity of surface bonded and amount of
adhesive used
Typical Cured
Performance Properties:
Color: Clear and Colorless
Cured Form: Non-flammable, brittle solid
Service Temperature: -40°F to 248°F (-40°C to 120°C)
Moisture Resistant: Yes
Chemical Resistance: Motor oil, unleaded gasoline, ethanol and isopropanol
Lap Shear Strength:
Steel (grit-blasted):
Aluminum (etched):
ABS:
PVC:
Polycarbonate:
3030 psi (20.9 N/mm²)
2480 psi (17.1 N/mm²)
1200 psi (8.3 N/mm²)
1030 psi (7.1 N/mm²)
1120 psi (7.7 N/mm²)
ISO 4587









