SDS

IDH number: 1884681
Product name: Loctite All Purpose 2in1 Seal & Bond
Page 2 of 5
Ingestion:
Rinse out mouth. Do not drink. Never give anything by mouth to an
unconscious person. If adverse health effects develop seek medical attention.
Symptoms:
See Section 11.
Notes to physician:
Treat symptomatically and supportively.
5. FIRE FIGHTING MEASURES
Extinguishing media:
Water spray (fog), foam, dry chemical or carbon dioxide.
Special firefighting procedures:
Water may be unsuitable as an extinguishing media, but may be helpful in
keeping adjacent containers cool.
Unusual fire or explosion hazards:
Closed containers may explode when exposed to extreme heat.
Hazardous combustion products:
Oxides of nitrogen. Oxides of carbon.
6. ACCIDENTAL RELEASE MEASURES
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected
personnel.
Environmental precautions:
Do not let product enter drains.
Clean-up methods:
Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up.
Absorb spill with inert material. Shovel material into appropriate container for
disposal. Wear appropriate protective equipment and clothing during clean-up.
7. HANDLING AND STORAGE
Handling:
Avoid contact with eyes. Avoid prolonged or repeated skin contact with this
material. Keep out of the reach of children.
Storage:
Keep from freezing.
For information on product shelf life, please review labels on container or check the Technical Data Sheet.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure
controls and protective equipment for each task performed.
Hazardous Component(s)
ACGIH TLV
OSHA PEL
AIHA WEEL
OTHER
None
None
None
None
None
Engineering controls:
Use local exhaust ventilation.
Respiratory protection:
No personal respiratory protective equipment normally required.
Eye/face protection:
None required in normal use.
Skin protection:
Use impermeable gloves and protective clothing as necessary to prevent skin
contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
pasty
Color:
Clear
Odor:
Acrylic
Odor threshold:
Not available.
pH:
7.7 - 8.6
Vapor pressure:
15 mm hg (20 °C (68°F))