SDS

IDH number: 1878876
Product name: Loctite Tub & Tile 2in1 Seal & Bond
Page 3 of 6
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure
controls and protective equipment for each task performed.
Hazardous Component(s)
ACGIH TLV
OSHA PEL
AIHA WEEL
OTHER
Limestone
10 mg/m3
TWA
Total
dust.
5 mg/m3 PEL
Respirable fraction.
15 mg/m3
PEL
Total
dust.
None None
Ethylene glycol
100 mg/m3 Ceiling
Aerosol.
None None None
n-
Butyl acetate
150 ppm TWA
200 ppm STEL
150 ppm (710
mg/m3) PEL
None None
Titanium dioxide
10 mg/m3 TWA
15 mg/m3 PEL Total
dust.
None None
Quartz (SiO2)
0.025 mg/m3
TWA
Respirable fraction.
2.4 MPPCF TWA
Respirable.
0.1 mg/m3
TWA
Respirable.
0.3 mg/m3
TWA
Total
dust.
None None
Engineering controls:
Use local exhaust ventilation.
Respiratory protection:
No personal respiratory protective equipment normally required.
Eye/face protection:
None required in normal use.
Skin protection:
Use impermeable gloves and protective clothing as necessary to prevent skin
contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
pasty
Color:
Ivory
Odor:
Acetate
Odor threshold:
Not available.
pH:
6.5 - 7.5
Vapor pressure:
17.5 mm hg (20 °C (68°F))
Boiling point/range:
> 100 °C (> 212°F)
Melting point/ range:
Not available.
Specific gravity:
1.3
Vapor density:
Heavier than air, (Air = 1)
Flash point:
155 °F (68.33 °C) Pensky Martens closed cup
Flammable/Explosive limits - lower:
Not available.
Flammable/Explosive limits - upper:
Not available.
Autoignition temperature:
Not available.
Evaporation rate:
0.3 (Water = 1)
Solubility in water:
Soluble
Partition coefficient (n-octanol/water):
Not available.
VOC content:
1.19 %; 144 g/l (by weight, calculated using CARB method; g/L less water,
less exempts calculated using SCAQMD method)
Viscosity:
112,000 - 160,000 cp
Decomposition temperature:
Not available.