SDS

IDH number: 2223503
Product name: Loctite Re-New Specialty Silicone
Page 2 of 6
4. FIRST AID MEASURES
Inhalation:
Move to fresh air. If symptoms persist, seek medical advice.
Skin contact:
Wash with soap and water. If skin irritation persists, call a physician. Wipe off
paste with paper towel or cloth.
Eye contact:
Flush with copious amounts of water, preferably, lukewarm water for at least
15 minutes, holding eyelids open all the time. If symptoms develop and
persist, get medical attention.
Ingestion:
Do not induce vomiting. If a person feels unwell or symptoms of skin irritation
appear, consult a physician.
Symptoms:
See Section 11.
5. FIRE FIGHTING MEASURES
Extinguishing media:
carbon dioxide, foam, powder, water spray jet, fine water spray
Special firefighting procedures:
Wear protective equipment. Wear self-contained breathing apparatus.
Unusual fire or explosion hazards:
None identified.
Hazardous combustion products:
Carbon monoxide. Carbon dioxide. Hydrogen sulfide. Sulphur oxides
6. ACCIDENTAL RELEASE MEASURES
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected
personnel.
Environmental precautions:
Do not allow product to enter sewer or waterways.
Clean-up methods:
Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up.
Store in a partly filled, closed container until disposal. Spilled material will
solidify. Scrape up as much material as possible. Maintain good ventilation for
large spills.
7. HANDLING AND STORAGE
Handling:
Do not handle contact lenses until all sealant has been removed from hands.
Residual sealant may transfer to lenses and cause eye irritation. Avoid contact
with eyes, skin and clothing. Keep out of the reach of children. Use only with
adequate ventilation. Protect from moisture.
Storage:
Store in a cool, dry area. Avoid moisture.
For information on product shelf life, please review labels on container or check the Technical Data Sheet.