Use and Care Manual

ManualsBrandsLoctite ManualsConstruction AdhesivePower Grab Ultimate Crystal Clear 9 fl. oz. Construction Adhesive (12-Pack)

Loctite® Power Grab® Ultimate

Crystal Clear Construction Adhesive

Page 1 of 4

Revision: November 23, 2220

Supersedes: September 2, 2020

Ref. #: 638831, 638835

Loctite® Power Grab® Ultimate Crystal Clear is a high-quality interior/exterior construction adhesive

that delivers crystal clear results in most applications. This formula works in all conditions, all weather

and on most materials. It can be applied in wet conditions as well as bond two non-porous surfaces.

Available As:

• Solvent Free – VOC Compliant

• High Solids – No Shrinkage

• Easy Application

• Works on a wide variety of surfaces, both porous and non-porous, and damp surfaces

• Excellent temperature Resistance

• Weatherproof & Water Resistant

• Can be used indoors and outdoors

Bonds to most common construction materials such as wood, plywood, OSB, MDF, concrete, glass,

marble, granite, tile, porcelain, stone, masonry, brick, foam insulation of all sorts including EPS

(expanded polystyrene foam), XPS (extruded polystyrene foam), metal, ceramic, drywall, rigid and

cellular vinyl/PVC trim and molding, and some plastics.

• Marine Applications

• Water submersion applications or constantly damp environments. Wet surface application

is possible if surfaces have the possibility to dry.

• Polyethylene, polypropylene, polytetrafluoroethylene (PTFE), and flexible / plasticized

PVC, acrylic glass, copper, and brass

• Polyethylene (PE) films that cover certain XPS or EPS foam insulation boards

• Bitumen coated surfaces

• Certain materials such as rubbers and plastics may have bonding difficulties. Test before

use.

• Adhesive may degrade if exposed to direct sunlight (i.e. glass table top repairs)

• Flexible sheet goods

• Not suitable for Mirror applications

• Do Not use building materials that are warped or show evidence of warping. These

materials will experience bonding difficulties.

Item #

Package

Size

2442595

Plastic Cartridge

9 fl. oz. (266 mL)

2442596

Squeeze tube

2.7 fl. oz. (80 mL)

DESCRIPTION

FEATURES & BENEFITS

LIMITATIONS

Loctite® Power Grab® Ultimate

Crystal-Clear Construction

Adhesive

RECOMMENDED FOR

Summary of content (4 pages)

PAGE 1
Revision: November 23, 2220 Supersedes: September 2, 2020 Ref. #: 638831, 638835 Loctite® Power Grab® Ultimate Crystal-Clear Construction Adhesive DESCRIPTION Loctite® Power Grab® Ultimate Crystal Clear is a high-quality interior/exterior construction adhesive that delivers crystal clear results in most applications. This formula works in all conditions, all weather and on most materials. It can be applied in wet conditions as well as bond two non-porous surfaces.
PAGE 2
Revision: November 23, 2220 Supersedes: September 2, 2020 Ref. #: 638831, 638835 COVERAGE For a 9-fl. oz. (266 ml) cartridge: ▪ A 1/4” (6 mm) bead extrudes approximately 27.6 ft. (8.4 m) ▪ A 3/8” (9.5 mm) bead extrudes approximately 12.3 ft. (3.7 m) For a 2.7-fl. oz. (80 ml) Squeeze Tube: ▪ A 1/4” (6 mm) bead extrudes approximately 8.3 ft. (2.5 m) ▪ A 3/8” (9.5 mm) bead extrudes approximately 3.7 ft. (1.
PAGE 3
Revision: November 23, 2220 Supersedes: September 2, 2020 Ref. #: 638831, 638835 DIRECTIONS Tools Typically Required: Utility knife, caulking gun, tool to puncture cartridge seal, plant mister bottle containing water (if bonding two non-porous surfaces). Safety Precautions: Wear gloves to avoid skin contact and wash hands after use. Preparation: For best results use above 41°F (5°C). For easier application, ensure the product temperature is 60°F (15°C) or higher but below 90°F (32°C).
PAGE 4
Revision: November 23, 2220 Supersedes: September 2, 2020 Ref. #: 638831, 638835 STORAGE AND DISPOSAL Not damaged by freezing. Store product at standard conditions which are defined as 72 ± 4°F (22 ± 2°C) and <50% relative humidity. After completion of work, seal cartridge nozzle tightly with aluminum foil. Wrap the foil tightly around the nozzle and seal it with tape. Applying petroleum jelly around the opening before sealing with aluminum foil can create a more airtight seal.