Robotics User Manual

FOR YOUR SAFETY
Operators who are involved in the programming, inspection and/o
r
maintenance of this robot must take the “special training course” for industrial
robots specified in Article 59 of the Occupational Health and Safety La
w
and relevant ministry ordinances.
Do not leave the unit plugged in (power cord and connectors) when it is not in
use for long periods of time. Dust can cause fire.
Be sure to shut off the power supply before removing the power cord.
Change the robot’s battery periodically (approximately every three years)
to prevent malfunction or breakdown.
Keep the emergency stop switch within reach of an operator while
teaching and running the robot.
Failure to do so may cause danger since the robot cannot be stopped
immediately and safely.
Regularly check that the I/O-S circuits and emergency stop switch wor
k
properly.
Failure to do so may cause danger since the robot cannot be stopped
immediately and safely.
Warnings
CARTESIAN Series

Features II CARTESIAN Benchtop Robot
ii