Robotics User Manual

FOR YOUR SAFETY
CARTESIAN Series

Be sure to check grounding.
Improper grounding can cause electric shock or fire.
Be sure to use within the voltage range indicated on the unit.
Failure to do so may cause electric shock or fire.
Plug the power cord into the wall outlet firmly.
Failure to do so can cause the input to heat up and may result in fire.
Make sure that the power plug is clean.
Be sure to unplug the power cord from the wall outlet when you
examine or grease the machine.
Failure to do so may cause electric shock or fire.
Stop operation and unplug immediately whenever you sense any
abnormalities, such as a pungent odor. Immediately contact the
dealer from which you purchased the product.
Continued operation may result in electric shock, fire or malfunction.
Install the product in a place which can endure it’s weight and
conditions while running.
Be sure to leave a space greater than 30cm between the back of the robot
(equipped with a cooling fan) and the wall. Installation in an insufficient or
unstable place can cause the unit to fall, overturn, breakdown, or overheat.
Be sure to take protective measures such as installing an area sensor or
enclosure to avoid injury.
Entering the robot
’s work range during operation could lead to injury.
Do not attempt to disassemble or modify the machine.
Disassembly or modification may cause electric shocks, fire or malfunction.
Warnings
Features II CARTESIAN Benchtop Robot
x