User's Manual

ManualsBrandsLoewe ManualsFlat Panel TVLoewe A 26 DVB-T

Operating additional equipment

Sound from PC or Set Top Box

Feed the analog audio signal from the PC or the STB to the sockets AUDIO

IN L/R on the TV via a cinch cable. The sound is reproduced by the TV speak-

ers.

If you have connected a digital external audio ampliﬁ er, you can select

the digitla audio signal in the connection wizard (TV menu – Connections

– New devices/modiﬁ cations) and assign it to the VGA/XGA socket. You

do the other settings for the audio ampliﬁ er as described for the digital

ampliﬁ er on page 25. The digital audio signal of the Set Top Box is fed in at

the AUDIO DIGITAL IN socket on the TV. The digital audio signal from the TV

AUDIO DIGITAL OUT is fed to the ampliﬁ er.

Component Video connection

If you have a DVD player/recorder with Component OUT connections, you

can connect it to the SD/HD-COMPONENT IN sockets of the TV instead of

to the Euro AV sockets. The connecting cable with three cinch plugs each

transmits picture information. The playback is better quality than via the

Euro AV socket.

You need another cinch cable for the analog sound transmission. Connect

the analog audio outputs of the DVD player to the AUDIO IN L/R sockets on

the TV set. The sound is reproduced by the TV speakers.

If you want to use the digital sound of the DVD player with a digital audio

ampliﬁ er connected to the TV, make a connection between AUDIO DIG

OUT of the DVD player and AUDIO DIGITAL IN of the TV set.

Assign the AUDIO DIG. IN input here, if a digital audio ampliﬁ er is also

connected, to the COMP. IN socket. You do the other settings for the audio

ampliﬁ er as described for the digital ampliﬁ er on page 25.

Set the signal at the Component input in the connection wizard.:

Set to “Automatic“ ﬁ rst. If the signal is not reproduced when playback is

started, consult the manual of the connected DVD device to ﬁnd out what

screen resolution is possible (SDTV, HDTV or ProScan).

Select the HDMI connection in the AV selection.

Call AV selection

Select COMP. IN sockets and with ...

call up

Start playback on the connected device.

Set geometry

Call the TV menu with the MENU button, select “Geometry“ with  and

set:

If the picture is not positioned correctly you can move the picture horizon-

tally and vertically here so that it ﬁ lls the whole screen. You can also set the

phase position so that the picture appears in the best possible quality.

VIDEOCOMP. IN

AVS

VGA/XGA

AV2

MI/DVI

AV selection

AV1

