Operation Manual

Art 40-55
User manual
53
Explanations of the setting options in the menu Timer data –
Additional options
Lock
recording
Only allow later playback of this recording after enter-
ing the PIN number (Parental lock).
If a PIN still has not been entered under System
settings ט Control ט Parental lock, the
Parental lock will at first be activated. See
chapter System settings, section Control –
Parental lock for further information.
Delete
protection
Safeguard the recording from being deleted auto-
matically by using the delete manager.
Auto time
control
(1
Your TV set can use the automatic time control
(Accurate Recording) for recording a programme.
The automatic time control takes control of the
corresponding monitoring of the start and end time
for DVB stations. The recording is started at the be-
ginning of the broadcast and switched off at the end,
even if the start and/or end time have been changed
by the programme provider.
The automatic time control is not supported by
all stations.
If yes is selected and automatic time control is
not supported by the recorded channel then no
recording is made.
If the programme information (Event-ID) should
not be available any more for the recording of a
programmed broadcast. e.g., due to a programme
change or because the Event-ID has been changed
by the station, the programme cannot be
recorded. The broadcasters alone are responsible
for the transfer of this data for using automatic
time control. The availability of the appropriate
data cannot be guaranteed by Loewe.
Recording
subtitles
Select whether broadcast subtitles are to be
recorded too.
In case of a direct recording the presetting is
taken from System settingsט Control טmore
... טDR+טRecording subtitles.
Favourite When selecting yes the recording will be added to
the Home favourites.
Timer Services
This menu offers you convenient alarm services. Programmed alarms
are also active when the TV set has been switched off to standby.
If the TV set is switched on from the standby mode by alarm, a screen
message appears. If this is not confirmed within 5 minutes with the
OK key, the TV set switches automatically off again for safety reasons.
The TV set can also be switched off automatically at certain times. A
screen warning appears one minute before automatic switch off. The
automatic switch off can be interrupted by pressing any key.
Call Timer Services
HOME: Calling the Home view.
 Select TV,
 select Timer (at sources),
OK call.
Or:
press longer: call the timer menu.
Select Timer Services.
Select the desired setting,
OK change.
OK adopt.
Explanations of the setting options:
Switch off
once
The set switches to the standby mode automatically
at the specified time.
If a time is specified which has already passed on
the same day, the set switches off at this time the
next day.
Switch off
daily
The set switches to the standby mode automatically
every day at the specified time.
One time
alarm
The set alerts you once today at the specified time.
If a time was specified which has already passed on
the same day, the alarm is saved for the next day.
Wake up
Mon-Fri
The set regularly alerts you from Monday to Friday
at the set time.
Wake up Sat
Wake up Sun
The TV set alerts on Saturdays or Sundays regularly
at the specified time.
Wake up with Indicate whether the TV set should enter the TV or
radio mode from stand-by during an alarm. The
station, which was last active, is activated.
Switch off once no yes, at ??:??
Switch off daily no yes, at ??:??
One-time alarm no yes, at ??:??
Wake up Mon-Fri no yes, at ??:??
Wake up Sat no yes, at 15:??
Wake up Sun no yes, at ??:??
Wake up with TV Radio
Timer Iist Timer Services
Back
Timer
Adopt with
OK
(1
only available if EPG data exists.

TV
Timer