Operation Manual

Loewe bild
User handbook
100

System settings
Channels
Update channel list automatically
Some programme providers offer an automatic update of the chan-
nel lists (Dynamic Channel Management). You may Allow or Block
an automatic channel list update. If automatic updating is allowed,
a screen message about an available update appears whenever the
list is changed.
Allow/block updates
HOME: Call Home view.
 Mark System settings,
OK call System settings.
 Mark Channels,
 go to next column.
Mark Update channel list automatically,
 go to next column.
 Select Allow or Block,
OK adopt.
If the channel list is not up to date, it will be
updated automatically, provided the option Allow
is selected.
Updating the channel list
A message appears whenever the TV is switched on if the network
provider changes their channel list.
In Update channel list automatically, Allow must
be selected.
 Select the desired procedure.
Because your network provider has changed its station list, it has to be adapted
on your TV set as well. Please specify when you wish to do this.
At once
After switch off to standby
Later
Update station list
Proceed with
At once The channel list will be immediately updated. Normally
this occurs in the background without interfering
further with the TV‘s operation. In exceptional cases,
it is however possible that during this process an
automatic channel change may be necessary.
After switch
off to
standby
The channel list will be updated the next time the TV
set is switched off into standby mode.
Later Updating the channel list will be postponed to a later
date. When the TV set is switched on and off, the
update message will appear again.
OK Confirm selection.
Transfer all channel lists
You can export all channel lists of your TV set to a USB storage device
or import channel lists.
Calling Transfer all channel lists
HOME: Call Home view.
 Mark System settings,
OK call System settings.
 Mark Channels,
 go to next column.
Mark Transfer all channel lists,
OK call.
 Select a target if several USB storage media
are available.
 Mark Export or Import,
OK confirm selection.
When you import channel lists, all channel lists are
overwritten in this device.
Before you remove the USB storage again, you need
to safely disconnect it with ‚Unmount‘ from the TV
set to prevent data loss.