Operation Manual

Loewe bild
User handbook
109
Automatic update via the internet
Your TV set checks at definite intervals whether a newer software than
the one installed in the TV set is available in the Internet. If this is the
case, you can find this out by a screen message.
In order to get informed about the new software, the TV set must
be connected to the Internet.
The Inform about new software item can also be switched on/
off at the end of initial installation.
Showing/Hiding information on new software
HOME: Call Home view.
 Mark System settings,
OK call System settings.
 Mark Control,
 go to next column.
 Mark Software update,
 go to next column.
 Mark Via Internet,
 go to next column.
 Mark Inform about new software,
 go to next column.
 Select yes / no,
OK Adopt.

System settings
Control
New software package found
For the menu item Inform about new software, yes is selected
(see left column).
If the TV set has found a new software version during the check, you
will be informed about this via a screen message.
 Select the desired procedure.
Load the
software
now
After confirmation, the new TV software will be
loaded from the internet and then programmed.
Load the
software
when
switch off to
standby
The software will be loaded and programmed after
the TV set has been switched off into standby mode
for the next time. The display on the control panel
will light up blue during the update.
The TV set must not be switched off at the mains
before the downloading process is complete (control
panel display lights up white)!
Load the
software
later (at
most
three-fold
notification)
Loading the software will be postponed to a later date.
The new software message will be displayed the next
time the TV set is switched on.
If the loading process is postponed three times then
the message will only be shown again once the next
software version is available.
Do not
load this
software
version
The new software will not be loaded. The on-screen
message will only be shown again for the next soft-
ware version.
Confirm selection.
A new software version is now available and can be downloaded from the internet.
New software: V4.4.40.0 (Current software: V4.4.31.0)
Please specify how you would like to continue:
Load new software now
Load software when switching off to standby
Load software later (max. 3 times notification)
Do not load this software version
SOFTWARE UPDATE WIZARD - New software
Adopt with
OK