Operation Manual

Loewe bild
User handbook
120
Network settings
Under Network settings make the settings for your network ad-
apters.
Call network settings
HOME: Call Home view.
 Mark System settings,
OK call System settings.
 Mark Multimedia / Network,
 go to next column.
 Mark Network settings,
 go to next column.
 Select desired menu item,
 go to next column.
Explanations of the setting options in the network menu:
Networking Here, the network wizard starts that guides you
through all necessary settings to your network (see
right hand column).
Host name Give your TV set a name so that it can be uniquely
identified in the network.
Proxy server Do the settings for using a proxy server. The proxy
server wizard will be called.
See chapter System settings, section Multimedia
/ Network – Proxy server for further information.
Wake on
LAN/WiFi
Here you can specify whether it is permitted to
access your TV set by LAN/WLAN in standby mode.
This allows you to switch on your TV, for example.
Please note that the TV set consequently uses more
power in standby mode.
After switching off the TV set into standby mode,
it takes minimum 30 seconds for the TV set to
be ready for reception of a signal (Wake on LAN/
WLAN) to power on via LAN/WLAN.
If you want to switch on your TV set via the Loewe
app by Wake on WLAN, you have to configure in
your router‘s encryption permanently on WPA2.
Setting WPA / WPA2 may not be used.
Network
The network wizard guides you through all the necessary settings
relevant to your network
At the beginning you see the current network status.
 Proceed to next step.
 Proceed to next step.
 Select network mode.
Select how you want to connect your TV set to
your network.
OK Confirm selection.
Off Deactivates all existing network adaptors of your
TV set.
On, wired
only
Access to the network only via a network cable.
The wireless access is deactivated.
On, wireless
only
Access to the network only via WLAN.
The access via a network cable is deactivated.
Depending on which type of network (wireless or wired)
was selected, the appropriate settings appear below.
Network
status
Security hint
Network
mode

System settings
Multimedia / Network