Operation Manual

Loewe bild
User handbook
124
Mobile Recording
(1
Mobile recording enables you to program recordings on your TV from
far away.
Basically, the function is based on a simple e-mail correspondence. If
the mobile recording function is activated and set, the TV set scans
an e-mail account at regular intervals.
If a record command is sent by the Loewe app, this command reaches
a connecting server.
From here, a short text email is sent to the appropriate email account.
The TV set can receive this information and program / start a recording
accordingly.
You can download the Loewe app for free for iOS and Android in
the appropriate app store.
The TV set must not be switched off using the power switch,
otherwise the email mailbox can not be scanned.
The TV set must be connected to the Internet.
The programmed timer recordings of the Mobile Recording function
are handled by the TV set with highest priority.
If at this time other recordings are programmed for the same
recording period, they will be overwritten by the new recording or
parts of the recording cut off.
Open settings for Mobile Recording
HOME: Call Home view.
 Select System settings,
OK call System settings.
 Select Multimedia / Network,
 go to next column.
 Select Mobile Recording,
OK call.
The Mobile Recording wizard is started.
 Select yes for Function enabled.
 Select Configure email account
ט Auto-
matic / Manual.
When selecting Configure email account טManual,
enter your own settings for personal mailbox account
(see right column).
When selecting Configure email account טAuto-
matic, the system mailbox will be used. In the next step,
the TV set displays the email address and the security
PIN of the system mailbox.
 Continue until the setting of scanning times.
 Carry out settings.
Settings of scanning times
When the TV set is in standby mode, you can determine the times at
which the TV automatically checks the defined mailbox for remote
programming.
If the TV set is switched on or in the Quick Start mode, a fixed
inspection interval of 10 minutes applies permanently.
Scanning
period
Here you can specify the period during which the TV
set checks the email account.
Inspection
interval
Here you can specify the time interval at which the
TV set checks the email account in the specified
period.
Start/end of
the scanning
period
Here, the start and end times are displayed
depending on the scanning period.
If you wish to enter start / end of the scanning
period individually, you must select user defined
for scanning period.
In the last step it is checked whether the email account is accessible
with the set data.
On successful test the configuration is completed.
Settings of personal email account
If the mailbox defined by the system was selected as the default email
account, the account is automatically created on the server. You do
not need to make further settings.
When selecting Configure email account טManual you need to
adjust the factory defaults and enter the settings of your existing
personal email account.
You will find the necessary parameters in the menu dialogues Settings/
Options of your email programme you are using (e.g. Outlook,
Thunderbird) or from the relevant provider of your email accounts.
Default settings page 1:
Email address: [e-mail]
Account type: POP3 or (IMAP)
Incoming mail server: mail.loewe-dialogue.com
Outgoing mail server (SMTP): mail.loewe-dialogue.com
Username: [e-mail]
Password: **************
Secure PIN: xxxx
Default settings page 2:
Incoming mail server port: 995 (POP3),0 993 (IMAP)
Incoming encryption: ‘no‘ , ‘SSL’ , ‘StartTSL’
Server equires authentification: ‘no‘
Outgoing mail server port:
‘25’ (no), ‘587’ (StartTSL), ‘465’ (SSL)
Outgoing encryption: ‘no‘ , ‘SSL’ , ‘StartTSL’
Delete mail from server: ‘no‘
Email account settings Reset
Remote programming via any email client
In case of a manual e-mail account, you can perform the remote
programming of recordings by means of any e-mail client.
The subject line of the email must include the defined four-digit
secure pin, the broadcasting time and the channel:
PIN BROADCASTING TIME OF CHANNEL
Example: 1234 20:45 Das Erste HD
1234 8.45 pm Das Erste HD
Timer programming of a broadcast, which runs on the current day
around 20:45 on the tv channel Das Erste HD. An exact specifica-
tion of start and end time of the programme is not required.
The channel name must not be 100% accurate, the name is
compared by means of a certain algorithm. It is advisable, however,
to store the channel name as a note in the smartphone.
If the recording time is more than 24 hours in the future, the date
must also be specified in the subject line:
1234 04/09/2014 20:45 Das Erste HD
1234 09/04/2014 8.45 pm Das Erste HD
You will get an e-mail response as confirmation from the TV set to
the address of the manual e-mail account with the current list of
programmed timer recordings.

System settings
Multimedia / Network
Mobile Recording
(1
Availability varies by device type (see chapter Technical data - equipment features for your TV set).