Operation Manual

Loewe bild
User handbook
130
Adjusting the speaker system (AUDIO OUT)
Sound playback via ... – Speaker system (AUDIO OUT)
Enter here that you want to hear the TV sound via a speaker system
connected to AUDIO OUT.
For information on navigation within the wizard, see chapter General
information on menu operation.
Speaker system (AUDIO OUT) was selected in the Sound
components wizard. Afterwards you can switch on the power switch
of the subwoofer.
 Select TV speakers + Subwoofer or Subwoofer
+ ext. front speakers.
OK Confirm selection.
Specify here whether you want to operate the
speakers of the TV set with an additional
subwoofer or a subwoofer with external front
speakers at the AUDIO OUT socket of the TV set.
 Continue with the appropriate selection.
TV speakers + Subwoofer
Adjust the volume for the subwoofer.
 Finish wizard.
This ends the sound components wizard for connecting
and setting up a speakers system.
Connect
speakers
Adjust
subwoofer
level
Subwoofer + ext. front speakers
 Here select yes, if the built-in TV loudspeakers
should work in addition to the external loudspeak-
ers.
If you here select no, no sound is output from the
TV loudspeakers.
OK Confirm selection.
 Proceed to
Adjust ext. Speakers level .
Adjust the volume of the ext. sound system
optimally to the TV volume.
An audio broadband signal is transmitted via
the AUDIO OUT jack. Therefore, the level of the
front speakers and the subwoofer varies
uniformly with the volume setting.
 Finish wizard.
This ends the sound components wizard for connecting
and setting up a speakers system.
TV
loudspeakers
as centre
speaker
Adjust ext.
Speakers
level

System settings
Connections