Operation Manual

Loewe bild
User handbook
131

System settings
Connections
continued on the next page
p
Adjusting the speaker system (DAL)
(1
Sound playback via ... – Speaker system (DIGITAL AUDIO LINK)
Enter here that you want to hear the TV sound via a speaker system
connected to Digital Audio Link. If you connect active speakers, please
use the setting Speaker system (DIGITAL AUDIO LINK).
For information on navigation within the wizard see chapter General
information on menu operation.
When setting up the speaker system for the first time, the
configuration starts with the step
Connect front speakers .
Speaker system (DIGITAL AUDIO LINK) was selected in the Sound
components wizard.
If you want to set up or change a speaker system:
 Select Configuration/modification.
If nothing has been set yet, the factory settings
or otherwise the last set values are displayed.
OK Confirm selection.
 Select Complete.
OK Confirm selection.
 Proceed to connect and set the front speakers.
 Select External speakers or TV speakers.
OK Confirm selection.
For External speaker go to the frequency bar
below and
set the lower limit frequency of the external
front speakers in steps of 10 Hz.
Configuration/
modification
Configuration/
modification
Connect
front
speakers
Select the start value of the frequency response of
the speakers for the correct setting (e.g., 50Hz for
the specification “Frequency response
50-20,000Hz”). See the technical data of the speak-
ers for the value.
You can replace the external front speakers by the
TV speakers if necessary. In this case, TV speakers.
Then, the TV speakers transmit the sound of the
front speakers.
 Proceed to connect and set the surround speakers.
 Select yes or no for the external surround speakers.
OK Confirm selection.
In case, external speakers were chosen as surround
speakers:
 Select frequency bar
set the lower limit frequency of the surround
speakers in 10 Hz steps.
Select the start value of the frequency response of
the speakers for the correct setting.
 Proceed to connect and set the centre speaker.
 Select whether the TV speakers or an External
speaker is to reproduce the centre sound or no
if no centre speaker is connected.
OK Confirm selection.
If no centre speaker is connected, the front speakers
also transmit the centre sound parts additionally.
For External speaker go to the frequency bar
below and
set the Lower Limit Frequency of the external
front speakers in steps of 10 Hz.
Select the start value of the frequency response of
the speakers for the correct setting.
 Proceed to connect the Subwoofer.
Connect
surround
speakers
Connect
centre
speaker
(1
Only for set types with built-in DAL connection (see chapter Technical data - equipment features for your TV set).