Operation Manual

Loewe bild
User handbook
132

System settings
Connections
 Select yes or no for Subwoofer.
OK Confirm selection.
If no subwoofer is connected, the front speakers
additionally transmit the sound parts intended for
the subwoofer as far as possible.
 Proceed to Distance to left hand front speaker.
Set the distance between the left front speaker
and your listening position in 10 cm steps.
Measure the distances from your listening position
to the front, surround, and centre speakers
respectively. The digital audio decoder calculates
delay times from this for the loudspeaker signals,
so that these reach the listener simultaneously.
 Proceed to the respective other speakers (right
front speaker, left surround speaker, right
surround speaker, centre speaker and subwoofer)
and also
 The selected speaker will be coloured blue.
After setting the distance to the subwoofer.
Proceed to Adjust speaker level.
Connect
subwoofer
Distance to
left front
speaker
Adjust the volume for the speaker.
 Proceed to next speaker or
 select speakers manually.
For balanced audio reproduction all speakers should
be set to the same volume level. A noise signal will
be reproduced automatically on each speaker in
succession. Adjust every speaker to equal perceived
volume from your listening position. The selected
speaker will be coloured blue.
After adjustment of the last speaker.
 Proceed to Subwoofer phase.
Switch a channel or a DVD player playing music to
music playback.
 Test both values (0º and 180º) and select the one
with which you get a clearer bass reproduction
from your listening position.
OK Confirm selection.
 Finish wizard.
This ends the sound components wizard for connecting
and setting up a speakers system.
Adjust
speaker level
Subwoofer
phase