Operation Manual

Loewe bild
User handbook
142

External devices
Digital Link HD
Operation of Digital Link HD (HDMI CEC) enabled devices
The Digital Link HD (HDMI CEC) function allows Loewe television sets
to transmit the remote control signals via the HDMI connection of the
TV set to compatible HDMI devices (such as Loewe BluTechVison 3D).
You can therefore set up and use a concealed CEC capable HDMI
device.
Thus, you can install a concealed CEC-enabled HDMI device and
operate it easily.
You can select and operate the CEC-capable HDMI device in two
different ways. On the one hand, by using a device key (STB, VIDEO
or AUDIO) to switch to the operation of the HDMI device. On the
other hand, by using the TV key to switch between HDMI device and
the TV set.
For third-party devices, the description (Digital Link HD / HDMI
CEC) for control over the HDMI connection may vary depending on
the manufacturer
Even if this control is available, a reliable function in conjunction with
the Loewe TV set cannot be guaranteed.
Switching between operation of TV set and HDMI device using
a device key
Assign the HDMI CEC function (code 22) to the desired device key
(STB, VIDEO or AUDIO). The assignment is described in chapter
External devices, section Setting the remote control – Setting
the remote control for other Loewe devices.
Subsequently, the assignment of the HDMI device used to the preset
device key will be done.
The CEC capable HDMI device is connected to one
of the HDMI sockets of the TV set and switched on.
Press required button for 5 seconds.
A selection menu appears on the TV set.
 Select required device from the list.
OK Accept.
The assignment of the device key and the
assignment of the HDMI device are completed.
Press the corresponding device key to switch to the
operation of the HDMI device.
The remote control commands are routed from the TV
set to the HDMI device.
Press the TV key to switch to the operation of the TV
set.
If the Auto off function (see right column) is enabled,
the HDMI device switches off.
Select HDMI device for key
No device
BluTech Vision
Select HDMI device for key Back
Cancel
Switching between operation of TV set and HDMI device
using the TV key
Switching the control via the TV key is only possible when no device
key is assigned to the HDMI device you are using.
Call Quellen.
Select a HDMI socket to which the HDMI device
is connected.
Pressing TV for a longer period: switch remote control
commands between HDMI and TV operation.
A message on the screen informs you about the
currently selected mode.
Pressing briefly TV: Switch to TV mode (back to
previous channel).
Automatically switching off external devices
When returning to TV mode by briefly pressing the TV key the external
device can be switched off.
You can find the settings in the System settings ט Connections ט
Digital Link ט Shutdown of the ext. device via TV button.
Menu item only available if at Digital Link HD - Functionality ט
on has been selected.
Remote switch on of the tv set
You can select whether the TV set is to switch on automatically from
Standby mode if a disc is played or a screen menu displayed on a
Digital Link HD-enabled device.
You can find the settings in the System settings ט Connections ט
Digital Link ט Remote switch on of the tv set.
Menu item only available if at Digital Link HD - Functionality ט
on has been selected.
Switching off the TV set and connected devices (system standby)
The operation of the TV set must be enabled (see
above).
Press the key briefly: TV set and all CEC-enabled de-
vices connected to the HDMI ports will be switched
off to standby (system standby).