Operation Manual

Loewe bild
User handbook
146
Connecting active loudspeakers
(1
If you want to use active speakers, you can connect them with an
adapter cable to the TV set.
Plug a network cable (Category 5e or higher) to the AUDIO LINK
port of the TV set. Connect the Ethernet cable to the RJ45 socket
of the Digital Audiolink / Audiolink converter available as ac-
cessory. To the other end of the convertor you connect the adaptor
cable Audiolink / 30cm / 9pin + 5.1 Out + Center In. Connect
the cinch connectors of the adaptor cable to the cinch connectors of
the speakers / subwoofer.
The cinch connections of the adaptor cable are labelled:
R for Front right SR for Surround right
L for Front left SL for Surround left
C for Centre SUB for Subwoofer
The connections for the adaptor cable are pre-amplifier
outputs. Therefore, only active loudspeakers / active
subwoofers may be connected directly to the adaptor cable.
Sound reproduction via the speaker system
The settings for sound reproduction via active speakers you find in the
sound components wizard (see chapter System settings, section
Connections – Sound components).
Connecting active loudspeakers
DIGITAL
AUDIO
LINK
R
SR
SL
L
C
SUB
CENTER
IN
R
SR
SL
C
SUB
L
Front
left Center
Front
right
Surround
left
Adapter cable
Surround
right
TV set
Subwoofer
Ethernet cable
(Cat. 5e or higher)
Converter
Digital Audiolink / Audiolink
Connection of active speakers to the TV set

External devices
Connecting the HiFi/AV amplifier
Connecting digital HiFi/AV amplifiers
Connect the digital audio output of the TV set SPDIF OUT to the digital
audio input of the amplifier via a cinch cable:
Connect digital audio (pre) amplifier via audio return channel
(HDMI ARC)
Connect the HDMI1 socket of the TV using an HDMI cable with the
HDMI socket of the ARC-compatible audio (pre) amplifier. It is not
necessary to log-in the amplifier separately with the TV set.
Connecting analogue HiFi/AV amplifiers
Use a stereo cinch/jack adaptor cable to connect the analogue audio
output AUDIO OUT to the analogue audio input of the amplifier:
Reproducing sound via an HiFi/AV amplifier
The sound reproduction via connected HiFi/AV amplifiers can be
adjusted in the sound components wizard (see chapter System set-
tings, section Connections – Sound components).
DIGITAL IN
SPDIF
OUT
Digital amplifier
TV set
AUDIO
OUT
AUDIO IN
R
L
Analogue amplifier
TV set
(1
Availability varies by device type (see chapter Technical data - equipment features for your TV set).