Operation Manual

Loewe bild
User handbook
147

External devices
(1
Adaptor available as an accessory (see chapter Accessories).
(2
Availability varies by device type (see chapter Technical data - equipment features for your TV set).
IR-Link
The IR Link function allows the operation of concealed additional
devices made by other manufacturers via the Loewe TV set.
The remote control commands are passed from the IR receiver of
the TV set via an externally connected infrared transmitter to the
additional device.
The code system for remote control commands that control the
additional device is RC5.
The control of the additional device is only possible when the TV set
is switched on.
The infrared transmitter required is available as an accessory from
your dealer (see chapter Accessories).
Connecting the infrared transmitter to the TV set
Insert the connector plug of the infrared transmitter into the RS-232C
socket of the TV set.
Lay the cable of the infrared transmitter to the front area of the ad-
ditional device used.
Installing the infrared transmitter on the additional device
Find the right position on the desired device (optical connection
between transmitter diode and IR receiver of the concealed device).
Remove the protective film from the adhesive surface of the infrared
transmitter.
Attach the infrared transmitter at this position.
RS-232C
IR
TV set
Serial interface RS-232C (RJ12)
You can connect a home network system of different manufacturers to
your TV set via the RS-232C (RJ12) interface.
As to the configuration of the RS-232C (RJ12) interface and for further
information on the various home networking systems contact your
dealer please.
Audio playback from external devices
Connect external AV devices (e.g., MP3 player) for sound reproduction
to the AV inputs of the TV set.
Connecting an external appliance (e.g. MP3 player)
Connect the output (jack socket) of the MP3 player via the VGA
adaptor
(1
to the AV socket of the TV set.
Select AV input
The selection of the AV input for a device at the AV socket
(connection as described above) is describe here as an example.
The procedure is similar to the selection of the other AV inputs.
Call Sources.
Mark desired AV source,
OK switch to AV source.
Start playback on the external device after selecting
the AV input.
Only playback of the audio signal from the AV source (screen
is off)
To play only the sound of a connected media player (e.g. MP3 player),
the AV sources can be selected so that the screen goes blank.
Switching off the screen reduces the power consumption of the
TV set.
Switching off the screen is possible for the AV sources HDMI1, HDM2,
HDM3 and HDMI 4
(2
via the menu options.
Call up the AV list.
Select desired connection,
OK press at least for two seconds.
Green key: Press the green key to switch the the
screen on and off again.
Connection example of an MP3 player
AV
MP3 player TV set