Operation Manual

Loewe bild
User handbook
148

External devices
Setting the remote control
Using the remote control for the TV mode of the TV set
Press the TV key, the LED above it will light for approx.
5 seconds.
Using the remote control for a Loewe recorder
Press the STB key, the LED above it will light for approx.
5 seconds.
Using the remote control for a Loewe player
Press the VIDEO key, the LED above it will light for
approx. 5 seconds.
Using the remote control for the radio mode of the TV set
Press the AUDIO key, the display above it will light for
approx. 5 seconds.
As long as a key is pressed, the LED for the selected operating mode
lights up (TV – STB – VIDEO – AUDIO). This allows you to check
which operating mode the remote control is set to every time you
press a button.
The factory setting of the keys is described above (see also table in
right hand column). The assignment of the buttons can be changed
to suit the existing accessory devices (see right hand column).
Set unit for sound control function on the remote control
The keys for the sound control functions Volume (
10
) and Sound on/off
(
1
) are programmed ex-factory to interact with the TV set. The unit to
be operated can be modified.
The device must first be placed on one of the device key of the
remote control (see right column) before the tone-control functions
can be changed to the appropriate device.
Press the TV key and the numerical key simultane-
ously for minimum 5 seconds. The LED above the
selected TV key flashes twice.
Function Buttons Unit
Audio
Functions
TV + 3 Auro/AudioVision/MediaVision 3D
TV + 4 Mediacenter
TV + 5 Loewe TV
TV + 6 Loewe TV with sound projector with-
out system connection
Setting the remote control for other Loewe devices
You can operate various Loewe devices with the remote control. The
device keys STB – VIDEO – AUDIO can be reassigned to operate
different Loewe devices.
Press the required device key and the STOP key
simultaneously for 5 sec. until the corresponding LED
display flashes twice.
Then enter the two-digit device code from the list below.
The corresponding LED indicator light flashes twice.
Unit Code Factory setting
Loewe ViewVision 8106 H 10
Loewe Viewvision, Centros 21x2 12
Loewe ViewVision DR
+
DVB-T 13
Loewe Auro 2216 PS/8116 DT 14
Loewe BluTech Vision Interactive 15
Loewe Sound Projector 17
Set-Top-Box (STB) data base 18
Loewe TV - Digital radio 19 Audio
Loewe Mediacenter 20
Loewe BluTech Vision 3D 21 VIDEO
HDMI CEC mode 22
Loewe AudioVision 24
Loewe Individual Sound Projector ID 25
Apple IR codes 26
Apple IR codes (Apple TV-2G) 27 STB
Loewe Soundbox 28
Loewe SoundVision 29
Loewe AirSpeaker 30
Loewe Soundport 31
Loewe MediaVision 3D 35
Restore defaults 99
The codes shown here only apply to direct operation of the auxiliary
device device.
The available codes may vary depending on the status of the firm-
ware in the remote control.
The factory setting of the device keys can vary depending on the
firmware version of the remote control