Operation Manual

Loewe bild
User handbook
16

Switching the TV set ON/OFF
Switching the TV set ON/OFF
Switching TV set to the standby mode
Put the mains supply switch into Pos I .
The LED display lights up white for a short time. The set now finds
itself in the standby mode.
Meaning of the LED colours:
white: TV set in standby.
Depending on the ambient brightness, the
white LED display is dimmed and lights
up with a different degree of brightness
(OPC)
(1
.
If the TV set is in quick start mode, the
white LED display is not dimmable and
starts with full brightness.
white, intermittent: TV set starts.
green: TV set switched on.
red: timer recording active.
blue:
TV set in standby and background opera-
tion active (EPG data updating, software
update or streaming server function
(1
,
OLED Calibration
(1
).
After switching on the TV set, it takes a few seconds for further oper-
ating commands to be processed (Exception: Quick start mode, see
chapter System settings, section Control – Quick start mode).
Your TV set is ready for operation once the LED display lights green.
Switching the TV set on by means of the remote control
Press the on/off key.
Or:
Press the TV key.
The previously watched channel will be called.
Or:
Press numerical keys 1-9.
The corresponding channel will be called.
After switching on the TV set, it takes a few seconds for further oper-
ating commands to be processed (Exception: Quick start mode, see
chapter System settings, section Control – Quick start mode).
Your TV set is ready for operation once the LED display lights green.
Switching the set off with the remote control (Standby)
Press the on/off key.
Switch TV set and all CEC-capable devices connected
to the HDMI interfaces OFF to Standby mode.
Before switching off the set with the mains switch,
we recommend you to switch it to standby mode.
Quick start mode
If you choose to activate the quick start mode, you will see the TV
screen immediately after each switching on of the TV set and without
any waiting time. You can specify the times at which your device will
be in the Quick Start Mode (see chapter System settings, section
Control – Quick start mode).
In this case, please note the higher power consumption (see chapter
Technical data) and thus a higher annual energy consumption.
Default setting for the Quick Start Mode: off .
(1
Availability varies by device type (see chapter Technical data - equipment features for your TV set).