Operation Manual

Loewe bild
User handbook
31

Initial installation
Setting options for DVB-S reception (continued):
After you have made the previous settings, you should
receive picture and sound of the selected satellites
(only possible for Astra1 and HOTBIRD).
 Proceed to next step.
 Select and adapt settings.
OK Confirm selection.
If several satellites are received, the following settings
must be made for every satellite. The type of settings
available may differ depending on the selected satellite
or network.
Scrambled
channels
You can state whether coded channels are to be
searched for in the search/update.
Select yes to save all found scrambled channels.
However, these channels can only be received in
connection with a CA module and the appropriate
Smart Card.
Handling of the CA module is described in chapter
System settings, section Extras – CA module.
Search
method
If you select Frequency search here, a search is
performed for all receivable channels. With Network
search, from all receivable networks all the channels
are searched which are supplied by these networks.
Depending on the selected network, this step
might possibly be skipped.
Accept
Logical
Channel
Number
In various countries, digital channels (DVB-S) are
transmitted with a preset channel number per chan-
nel, known as Logical Channel Numbers (LCN).
If you select yes here, these default channel slots
will be used and the channels of the preferred signal
source will be sorted as per LCN. The channels in
the channel list can no longer be shifted.
 Proceed to next step.
Proceed to section Setting options for all types of
reception.
Test reception
Settings