Operation Manual

Loewe bild
User handbook
49

TV
PIP
Picture in Picture (PIP)
The concurrent display of two different images is referred to as Picture
in Picture.
Restrictions with PIP operation:
In PIP mode, it is generally not possible to use analogue channels
and analogue sources (AV, PC IN etc.) for main/PIP picture.
Picture change and channel selection are restricted during record-
ing.
The PIP mode cannot be operated via the colour buttons while an
HbbTV application is active.
The iPIP menu item is not available for non-dual-channel devices
(4
or when selecting an AV interface (HDMI, etc.).
The selection and combination options for the main display/PIP
display depends on the version of your set or on the number of
available tuners for the TV set and the image signal (SDTV / HDTV
/ UHD-TV) the set receives.
Simultaneous display of...
z (yes)/– (no)
a digitally broadcast channel (DVB-T/C/S) and
picture from a digital AV source (e.g. HDMI1)
z
a digitally broadcast channel DVB-T/C/S and a
channel over analogue cable television
–
a digitally broadcast channel over DVB-T/C and
a satellite broadcaster (DVB-S)
z
(1
/ –
(2
two channels over analogue cable television
–
two digitally broadcast channels (DVB-T/C/S)
z
(1
/ –
(2
a free-to-air and an encrypted digitally broad-
cast channel (DVB-T/C/S)
A CA module with corresponding smartcard
is required for decryption.
z
(1
/ –
(2
two encrypted channels
Two CA modules with corresponding smart-
cards are required for decryption.
z
(1
/ –
(2
an SDTV channel and an HDTV channel (DVB-
T/ C /S )
z
(1
/ –
(2
two HDTV channels (DVB-T/C/S)
z
(1
/ –
(2
a channel in the HEVC / H.265 standard and
any other channel.
–
two channels in the HEVC / H.265 standard.
–
(3
PIP functionality Standard PIP/iPIP:
Standard PIP:
Within the scope of the display options, the channels for PIP and TV
display can be selected and interchanged at will.
A green frame around the PIP display indicates that the channel selec-
tion affects the PIP display. A white frame means that the operation
refers to the main display. If the frame is blue, Play channel is active
in the PIP display.
iPIP:
When the iPIP mode starts up, the channel shown in the TV display is
moved into the PIP display. You can now select any other channel for
the TV display. When exiting iPIP mode, the PIP display becomes the
TV display again and the PIP window is closed.
An orange frame around the PIP display indicates iPIP functionality.
Start and end iPIP mode
PIP: Move the current TV display to the PIP display.
You can choose other channels for the TV display
and still keep an eye on the PIP display. This allows
you to temporarily move advertising or parts of
programs to the PIP display.
PIP: Move the PIP display back to the TV display (PIP
off).
Start and end standard PIP mode
PIP: Show/hide PIP display.
Selecting the channel of the PIP picture
If the frame colour of the PIP picture is not green,
press the green key.
Select the channel as usual. (see also chapter TV,
section Select channel or chapter Sources).
(1
On set types with Dual Channel (see chapter Technical data - equipment features for your TV set).
(2
On set types without Dual Channel (see chapter Technical data - equipment features for your TV set).
(3
For set types with Chassis SL4xx, two DVB-T2 HD channels are possible in the HEVC / H.265 standard with full HD resolution.
(4
Availability varies by device type (see chapter Technical data - equipment features for your TV set).