Operation Manual

Loewe bild
User handbook
51
Vogels Motion Mount
The motorised, adjustable Vogel‘s MotionMount wall mount system
makes it possible for you to change the position of your TV by remote
control, including changing the distance between the TV and the wall.
Not only can MotionMount be controlled via Vogel‘s own MotionMount
app, it can also conveniently be operated via the TV menu using the
Loewe assist remote control.
The wall bracket and the TV set communicate via Bluetooth.
Please check the instructions included with Vogel’s MotionMount
to determine if the weight of your TV is suitable for the wall mount
system. Mount the MotionMount as described in the original Vogel‘s
manual.
Loewe does not guarantee the availability and functioning of Vogel‘s
MotionMount. For support with the motorised wall mount system,
please contact Vogel‘s directly.
Mounting a Loewe TV set with VESA attachment points
(1
to Vogel‘s
MotionMount requires the use of Loewe Vesa adapter bolts.
If Loewe Vesa adapter bolts are not used, the TV set may be dam-
aged.
Your dealer will supply you with the appropriate Vesa adapter bolts
for your TV set. The item numbers are listed in the chapter Acces-
sories.
To control Vogel‘s motorised adjustable MotionMount wall mount
system directly via your TV set, your TV
(1
must have Bluetooth
functionality.
Connecting Vogel‘s MotionMount system to the TV
Vogel‘s MotionMount is correctly mounted and
ready for use.
HOME: Calling the Home view.
 Select System settings,
OK call System settings.
 Select Multimedia / Network,
 go to next column.
Select Bluetooth,
OKcall.
The system automatically starts searching for Blue-
tooth devices in the vicinity for 2 min.
If Vogel‘s MotionMount is available, it will be displayed
in the list.
Mark Vogel‘s MotionMount,
OK select.
The TV set and Vogel‘s MotionMount are now
paired. No new pairing is required after switching
the TV on/off. It occurs automatically when the
turning functionality is called up.

TV
Vogels Motion Mount
Adjusting Vogel‘s MotionMount manually
In normal TV operation, without further displays:
MENU: Call up menu options.
 Select Rotate TV,
OK access. Or:
Call up the Rotate TV menu directly.
The following message appears: Connection is being
established to wall mount. Please allow some
seconds ….
Once the connection is established, the Turn TV menu
appears.

Reduce/increase the distance between the wall/TV.
Turn the TV set left/right or swivel it.
While turning, the wall bracket may automatically
increase the distance between the TV set and the
wall to provide enough room to rotate the TV.
The TV can be rotated through the entire turning
range when the wall bracket is at maximum
distance from the wall.
If the wall mount is manually adjusted, this position
can also be saved via the position menu.
REC: Call up the position menu (see next page).
BACK: Exit Rotate TV.
(1
Availability varies by device type (see chapter Technical data - equipment features for your TV set).